SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 64 GB DDR4 2666 SODIMM kit validated for QNAP TVS-H674T and TVS-H874T NAS systems
This 64 GB kit contains two 32 GB DDR4 2666 modules built for QNAP TVS-H674T and TVS-H874T NAS units. It targets administrators who need to expand memory capacity on those specific models. The unbuffered non-ECC design matches the platform requirements. Compatibility is validated for the listed QNAP systems only.
Each SODIMM uses a standard 260-pin DDR4 edge connector and operates at 1.20 V with CL19 latency. The low-profile form factor fits tight NAS slots without interfering with neighbouring components. Major OEM DRAM from Samsung, Micron or Hynix is used throughout. No heat spreaders are fitted, so airflow in compact bays remains unrestricted.
The kit delivers 64 GB via two 32 GB ranks of 2Rx8 organisation. This is the maximum supported configuration for the target QNAP models. Builders who need more storage or ECC protection cannot use this kit. Systems requiring registered or higher-density modules must choose different memory.
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2666MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS21300-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT |
Yes, the modules run at 2666 MT/s (PC4-21300) and the system will clock them at that rate regardless of any higher board capability.
The kit uses standard 260-pin DDR4 SODIMM form factor, which matches the SO-DIMM slots on both QNAP models.
Power off the NAS, open the chassis, insert each module at an angle until the gold contacts disappear, then press down until the side clips click; the step often missed is fully seating both clips so the module does not sit loose.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?