We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 SODIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 260-Pin SODIMM Kit for POSIFLEX XT-8315

SKU CH-WEDR-WZ43W

64 GB DDR4 3200 CL22 dual-channel SODIMM kit for POSIFLEX XT-8315 terminals

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit expands POS terminal memory capacity
  • DDR4 3200 CL22 modules deliver responsive multitasking
  • 2 V operation reduces power draw in fanless systems
  • 260-pin SODIMM form factor fits POSIFLEX XT-8315 slots
  • Tested with Samsung, Micron or Hynix chips for reliable operation

POSIFLEX XT-8315 memory kit

This 64 GB kit uses two 32 GB DDR4 3200 SODIMM modules built for the POSIFLEX XT-8315 fanless POS terminal. It targets IT teams who need maximum supported capacity in that specific platform without changing voltage or form factor.

Verify SODIMM slots and DDR4 support

Before ordering, confirm the terminal has two free 260-pin SODIMM slots and accepts DDR4 3200 non-ECC unbuffered memory at 1.2 V. The kit is 2Rx8 rank organisation; check the service manual to ensure the board can address dual-rank modules in both sockets.

Unbuffered modules without heat spreaders

Modules are plain green PCBs with no heat spreader, keeping height low for the fanless chassis. Major OEM chips from Samsung, Micron or Hynix are used. The 260-pin edge connector matches the terminal's SO-DIMM sockets for direct insertion.

Highlights

  • 64 GB kit expands POS terminal memory capacity
  • DDR4 3200 CL22 modules deliver responsive multitasking
  • 2 V operation reduces power draw in fanless systems
  • 260-pin SODIMM form factor fits POSIFLEX XT-8315 slots
  • Tested with Samsung, Micron or Hynix chips for reliable operation

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Questions about this item

What comes in the box and is anything else needed to install the two 32 GB SODIMMs?

The kit includes two 32 GB DDR4 3200 CL22 260-pin SODIMM modules; no extra parts or tools are required for installation.

Which capacity and speed version should I pick for the POSIFLEX XT-8315?

This 64 GB kit (2 x 32 GB) running at 3200 MT/s with CL22 latency is the configuration validated for the XT-8315.

What does the 3200 MT/s rating deliver once the modules are seated in the terminal?

The modules operate at 3200 MT/s (PC4-25600) with 1.20 V and CL22 timing, providing the rated bandwidth and latency for the XT-8315 platform.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.