We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 2Rx4 ECC RDIMM memory upgrade

SKU CH-4JG4-PPWNV

Dual-channel 64 GB DDR4 3200 ECC RDIMM kit with CL22 latency and 1.20 V operation for ThinkMate Supermicro servers

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB total capacity from two 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design protects data integrity in servers
  • 2 V operation reduces power draw under load
  • Validated for ThinkMate Supermicro SuperServer 510P-WT and 110P-WTR systems

64GB DDR4 3200 ECC RDIMM kit

This 64GB kit contains two 32GB registered DDR4 modules rated at 3200 MT/s with CL22 latency. It is built for ThinkMate and Supermicro servers that require ECC registered memory. The 2Rx4 organisation and 1.20V operation match the platform specifications. Buyers needing non-ECC or unbuffered DIMMs for desktop boards cannot use this kit.

DDR4 3200 registered interface limits

The DDR4 3200 standard caps transfer rate at 3200 MT/s and the registered buffer adds one cycle of command latency. ECC operation consumes one extra bit per byte for error correction, reducing usable bandwidth slightly. Systems that only support lower DDR4 speeds or lack registered DIMM support will not accept these modules.

64GB capacity for multi-threaded workloads

Two 32GB ranks provide 64GB total, sufficient for virtualisation hosts, database buffers and large dataset caching. The 2Rx4 density fits boards with limited slot counts while leaving room for future expansion if more slots are free. Workloads that exceed 64GB or require higher frequencies will outgrow this configuration.

Highlights

  • 64 GB total capacity from two 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design protects data integrity in servers
  • 2 V operation reduces power draw under load
  • Validated for ThinkMate Supermicro SuperServer 510P-WT and 110P-WTR systems

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-324K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Should I choose the 64GB kit or buy single 32GB modules to reach the same capacity?

The 64GB kit supplies two matched 32GB modules (2 x 32GB) tested together for dual-channel operation, while single modules are not guaranteed to pair without timing mismatches.

What does the DDR4 3200 rating deliver once installed in a compatible ThinkMate or Supermicro server?

The modules run at 3200 MT/s with CL22 latency at 1.20V, providing PC4-25600 bandwidth for registered ECC workloads on supported platforms.

How does the 288-pin RDIMM interface limit usable speed or capacity on these systems?

The 288-pin DDR4 RDIMM form factor locks the kit to DDR4 slots; it cannot fit DDR5 boards, and registered signalling is required by the target ThinkMate and Supermicro servers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.