We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 2Rx8 CL40 ECC RDIMM Dell PowerEdge XR7620 memory upgrade

SKU CH-M3HB-BGEXZ

Dell PowerEdge XR7620 DDR5 ECC RDIMM kit adding 64GB at 4800MT/s CL40 1.1V

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity with two 32 GB modules for server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data paths
  • ECC registered RDIMM with 2Rx8 organisation protects data integrity
  • Low 1.1 V operation reduces power draw in dense rack deployments
  • Validated for Dell PowerEdge XR7620 ensuring drop-in compatibility

Capacity & Compatibility

This NEMIX RAM kit provides 64 GB of DDR5 memory in a two-module configuration. It is built for the Dell PowerEdge XR7620 rack server and uses registered ECC RDIMM modules that operate at 1.1 V.

Who This Suits

Administrators expanding a PowerEdge XR7620 with validated ECC registered memory will find this kit a direct fit. Buyers who need unbuffered UDIMM modules, a different pin count or non-ECC operation should look elsewhere.

Deciding Specification

The modules are 288-pin DDR5 RDIMMs rated at 4800 MT/s with CL40 latency and a 2Rx8 organisation. Confirm that your server requires registered ECC RDIMMs at this speed before ordering.

Highlights

  • 64 GB total capacity with two 32 GB modules for server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data paths
  • ECC registered RDIMM with 2Rx8 organisation protects data integrity
  • Low 1.1 V operation reduces power draw in dense rack deployments
  • Validated for Dell PowerEdge XR7620 ensuring drop-in compatibility

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-324K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will this DDR5 4800 kit run reliably with the existing 32GB modules already in my PowerEdge XR7620?

This kit provides two 32GB registered ECC RDIMMs at 1.1V CL40; mixing ranks or speeds can prevent the server from posting, so Dell recommends populating all slots with identical modules.

How do I confirm the 64GB kit is detected and error-correction is active after installation?

Enter the system BIOS or iDRAC interface on the PowerEdge XR7620 — both will show 64GB total capacity, DDR5 4800 speed, and ECC status as enabled when the modules are seated correctly.

What exactly ships in the box and do I need any extra brackets or cables?

The package contains two 288-pin DDR5 RDIMM modules (2 x 32GB) only; no heat spreaders, brackets, cables or tools are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.