We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 ECC RDIMM CL40 1Rx4 SuperMicro X13SET-G X13SET-GC memory upgrade

SKU CH-V6N5-N31MA

64 GB dual-channel DDR5 ECC RDIMM kit running at 4800 MT/s with CL40 latency, 1.1 V voltage and 1Rx4 registered modules validated for SuperMicro X13SET-G and X13SET-GC server motherboards

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64GB total capacity from two 32GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design detects and corrects data errors
  • 1V operation reduces server power draw
  • Validated for SuperMicro X13SET-G and X13SET-GC motherboards

Targeted server upgrade

This 64GB kit delivers two 32GB DDR5 4800 registered ECC modules built for the SuperMicro X13SET-G and X13SET-GC motherboards. It is aimed at administrators expanding memory capacity in compatible Supermicro server or workstation platforms.

Registered ECC integration

The modules install into standard 288-pin DDR5 RDIMM slots and operate at 1.1V with CL40 latency. Registered buffering and on-die ECC reduce electrical load on the memory controller and protect data integrity, freeing the CPU from parity overhead in multi-module configurations.

Baseline thermals and power

Running at the specified 1.10V, the 1Rx4 Samsung Micron Hynix ICs draw minimal power and produce low heat without a heat spreader. Passive airflow from typical server chassis fans keeps temperatures stable during sustained workloads, and the registered design limits signal noise on the memory bus.

Highlights

  • 64GB total capacity from two 32GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design detects and corrects data errors
  • 1V operation reduces server power draw
  • Validated for SuperMicro X13SET-G and X13SET-GC motherboards

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 4800 MHz DDR5 speed hold under sustained server workloads?

The modules run at DDR5 4800 (PC5-38400) with CL40 latency and 1.10 V, which is the JEDEC base specification for this speed grade.

How much heat do two 32 GB RDIMMs produce when the system runs all day?

These are bare 1Rx4 registered DIMMs without heat spreaders, operating at the standard 1.1 V DDR5 voltage, so thermal output matches typical server memory at this density.

Which motherboard slots and CPU memory controllers are required for this kit to function?

The kit is validated for SuperMicro X13SET-G and X13SET-GC motherboards, which provide 288-pin DDR5 RDIMM slots and a compatible memory controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.