We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 ECC UDIMM memory upgrade for QNAP TS-H1677AXU-RP

SKU CH-03GW-W7ZKJ

64 GB dual-channel DDR5 ECC UDIMM kit running at 4800 MHz with CL40 latency for the QNAP TS-H1677AXU-RP NAS

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 64GB 2X32GB

  • Validated for QNAP TS-H1677AXU-RP NAS compatibility
  • ECC protection maintains data integrity under load
  • 64GB dual-channel kit expands memory capacity
  • 4800MHz DDR5 speed accelerates workload throughput
  • 10V operation reduces system power draw

NEMIX RAM 64GB DDR5 4800 ECC UDIMM Kit

This 64GB kit contains two 32GB DDR5 4800 modules built to PC5-38400 specifications. It targets IT professionals and NAS administrators who need error-correcting memory for the QNAP TS-H1677AXU-RP platform. Each module runs at 1.1V with CL40 latency and uses a 2Rx8 organisation for stable operation under sustained workloads.

QNAP TS-H1677AXU-RP NAS Memory Upgrade

The kit suits buyers who must add 64GB of ECC unbuffered DDR5 to a compatible QNAP NAS and want factory-tested modules from a specialist memory supplier. It is not for buyers who need registered or load-reduced DIMMs, nor for systems that require a heat spreader on every module. The unbuffered design and absence of a spreader mean the memory connects directly to the board without additional cooling hardware.

288-Pin DDR5 ECC UDIMM 1.1V CL40 Specification

The single specification that decides fitment is the 288-pin DDR5 ECC unbuffered UDIMM form factor running at 1.1V with CL40 timing. Only systems that accept this exact module type, voltage and latency will recognise the full 64GB capacity at 4800MT/s. Verify the QNAP TS-H1677AXU-RP motherboard manual before purchase.

Highlights

  • Validated for QNAP TS-H1677AXU-RP NAS compatibility
  • ECC protection maintains data integrity under load
  • 64GB dual-channel kit expands memory capacity
  • 4800MHz DDR5 speed accelerates workload throughput
  • 10V operation reduces system power draw

Specifications

BrandNEMIX RAM
SeriesQNAP NAS Compatible Series Memory
ModelQNAP DDR5 4800MHZ ECC Unbuffered UDIMM NAS Memory
Part NumberME38400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemQnap
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank2Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC Unbuffered UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does DDR5 4800 PC5-38400 set the maximum data rate the QNAP TS-H1677AXU-RP can use?

The kit is rated at 4800 MT/s with a PC5-38400 designation; the NAS will operate the modules at the highest speed its memory controller supports.

What physical slot and module height does the 288-pin 32GB UDIMM require in the TS-H1677AXU-RP?

Each module uses a standard 288-pin DDR5 UDIMM form factor without a heat spreader, so it fits the NAS DIMM slots without clearance issues.

What is the correct installation sequence for the two 32GB sticks, and which step is often missed?

Power off the NAS, open the chassis, insert both modules firmly until the latches click, then power on and verify 64GB is recognised in the QTS firmware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.