We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, no heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx4 ECC RDIMM memory upgrade

SKU CH-ANRN-YCC5P

A 64 GB DDR5 kit of two 32 GB registered ECC RDIMMs running at 5600 MT/s with CL46 latency for Supermicro servers

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity for memory-intensive workloads
  • DDR5 5600 speed with PC5-44800 bandwidth
  • ECC registered design protects data integrity
  • 10 V operation reduces power draw
  • 2Rx4 dual-rank layout on 288-pin RDIMM

Server Memory Kit

This NEMIX RAM kit provides 64 GB of DDR5 registered ECC memory in two 32 GB modules. It is built for Supermicro server and workstation platforms that require registered RDIMM modules. The kit operates at 5600 MT/s with a CAS latency of CL46 and a voltage of 1.10 V. Each module uses a 2Rx4 organisation and 288-pin DDR5 form factor.

Compatibility Scope

This memory suits administrators upgrading compatible Supermicro motherboards such as the MBD-X13DGU AI SuperServer that accept registered ECC RDIMMs. It is not for desktop or laptop systems that only support unbuffered non-ECC UDIMM modules. It is also not for servers that require load-reduced LRDIMM or a different rank configuration. Buyers must verify their platform’s qualified vendor list before purchase.

Deciding Specification

The registered ECC RDIMM design with 2Rx4 organisation is the single specification that determines fit. Only systems whose memory controller and BIOS support registered error-correcting modules at DDR5 5600 will recognise and stabilise this kit. If the target server demands unbuffered memory or a different rank structure, the modules will not function.

Highlights

  • 64 GB total capacity for memory-intensive workloads
  • DDR5 5600 speed with PC5-44800 bandwidth
  • ECC registered design protects data integrity
  • 10 V operation reduces power draw
  • 2Rx4 dual-rank layout on 288-pin RDIMM

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-324K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does the 1.10V DDR5 5600 kit draw under sustained load?

Each module runs at 1.10 volts, the standard DDR5 voltage, so power draw stays within the platform's registered DIMM budget even during all-day workloads.

What motherboard slot and chipset support are required for these 288-pin RDIMMs?

The kit needs a Supermicro motherboard with DDR5 RDIMM slots and a chipset that supports 2Rx4 registered ECC modules at 5600 MT/s.

Can the 2Rx4 registered ECC modules share channels with 1Rx4 or 2Rx8 DDR5 RDIMMs already installed?

Mixing ranks is possible on supported Supermicro platforms, but the memory controller will train all populated slots to the lowest common speed and latency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.