We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks in a clear plastic tray

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600MHz ECC Registered RDIMM memory upgrade for Supermicro X14SDI-36C-SP3F

SKU CH-ZX3Q-87PEM

A 64 GB DDR5 ECC registered RDIMM kit delivering 5600 MHz speed and CL46 latency for the Supermicro X14SDI-36C-SP3F

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • 64 GB capacity from two 32 GB modules for full population
  • DDR5 5600 MHz speed rated at PC5-44800 for rated throughput
  • ECC registered design corrects single-bit errors and buffers every slot
  • 10 V operation at CL46 latency matches controller expectations
  • 288-pin RDIMM form factor verified for Supermicro X14SDI-36C-SP3F

Exact-fit server upgrade

This 64 GB kit provides two 32 GB DDR5 RDIMMs built to the precise rank, voltage and timing the Supermicro X14SDI-36C-SP3F memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly. The 288-pin form factor matches the board's required RDIMM layout.

Sustained-load stability

Registered buffering keeps electrical loading low across all channels, allowing the memory subsystem to maintain 5600 MT/s throughput during continuous workloads without throttling. ECC detection and correction runs on every transaction, preventing silent data corruption that would otherwise accumulate under long-running compute or database tasks. The 1.1 V operating voltage supports consistent thermal behaviour in densely populated server chassis.

DDR5 interface limits

The PC5-44800 standard caps per-pin transfer rate at 5600 MT/s, so this kit cannot exceed that bandwidth regardless of processor capability. CL46 latency is fixed by the module's SPD profile and cannot be tightened without violating the validated specification. Population rules for the X14SDI-36C-SP3F restrict maximum capacity per channel, so adding further DIMMs beyond the board's approved layout will not increase usable memory.

Highlights

  • 64 GB capacity from two 32 GB modules for full population
  • DDR5 5600 MHz speed rated at PC5-44800 for rated throughput
  • ECC registered design corrects single-bit errors and buffers every slot
  • 10 V operation at CL46 latency matches controller expectations
  • 288-pin RDIMM form factor verified for Supermicro X14SDI-36C-SP3F

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 5600 MHz kit draw at 1.1 V when the server runs continuously?

The modules operate at 1.1 V with DDR5 5600 speed and CL46 timings, a combination designed for stable power draw in fully populated registered DIMM configurations.

What motherboard feature must my Supermicro X14SDI-36C-SP3F already provide for these RDIMMs to function?

The board must support 288-pin DDR5 Registered ECC memory with 2Rx8 organization and PC5-44800 data rate so the memory controller can initialise the kit at its rated 5600 MHz.

Will the 2Rx8 registered ECC modules work in the remaining slots if I keep older single-rank DDR5 RDIMMs installed?

Mixing 2Rx8 registered ECC DIMMs with different rank counts is not guaranteed; the X14SDI-36C-SP3F manual should be consulted for approved population rules before combining them.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.