We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 6400 CL52 2Rx4 ECC RDIMM memory upgrade

SKU CH-MAEG-VQ2QV

Dual-rank 64 GB DDR5 kit with ECC and registered buffering at 1.10 V CL52 for Supermicro servers

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 6400 (PC5 51200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection guards data integrity with registered DDR5 modules
  • 64 GB total capacity from two 32 GB sticks
  • 6400 MT/s speed rated at PC5-51200
  • CL52 latency at 1.1 V operating voltage
  • 288-pin 2Rx4 RDIMM built for Supermicro X14SBM-TF

Server-grade DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 64 GB of DDR5 memory in a matched pair of 32 GB modules. The registered ECC design targets Supermicro server and workstation platforms that require error-correcting, buffered DIMMs for data integrity. It is not intended for consumer desktop boards that accept only unbuffered non-ECC memory.

Verify registered ECC support before purchase

Confirm that your motherboard explicitly lists DDR5 RDIMM compatibility and that the BIOS recognises registered ECC modules. Systems limited to UDIMM or non-ECC memory will not post with this kit. Check the vendor documentation for the exact slot population rules for 2Rx4 modules. Mixing with existing unbuffered DIMMs is not supported.

Low-voltage operation at 1.10 V

The modules run at the standard DDR5 voltage of 1.10 V with a CL52 latency profile at 6400 MT/s. No heat spreader is fitted, so airflow across the PCB relies on chassis cooling. Registered buffering adds minimal latency overhead while maintaining signal integrity under sustained server workloads. Power draw scales with capacity and rank count.

Highlights

  • ECC protection guards data integrity with registered DDR5 modules
  • 64 GB total capacity from two 32 GB sticks
  • 6400 MT/s speed rated at PC5-51200
  • CL52 latency at 1.1 V operating voltage
  • 288-pin 2Rx4 RDIMM built for Supermicro X14SBM-TF

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 6400MHZ ECC RDIMM Registered Server Memory
Part NumberMR51200-324K2
Capacity64GB (2 x 32GB)
SpeedDDR5 6400 (PC5 51200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR5 6400MHZ PC5-51200 2Rx4 1.1V CL52 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the kit include only the two 32 GB modules or are extra cables or brackets supplied?

The package contains the 64 GB kit made up of two 32 GB DDR5 RDIMM modules and nothing else.

Should I choose this 64 GB CL52 kit or a different capacity for a SuperMicro X14SBM-TF build?

This 64 GB (2 x 32 GB) DDR5 6400 CL52 ECC RDIMM kit matches the board’s validated configuration.

What does the DDR5 6400 CL52 rating deliver in a live server workload?

It runs at 6400 MT/s with CAS latency 52 at 1.1 V, providing registered ECC bandwidth for stable throughput.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.