We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (4×16GB) DDR5-4800 CL40 1.1V ECC RDIMM 1Rx8 Supermicro H14SSF

SKU CH-2YFH-TW6CD

A 64 GB kit of four 16 GB DDR5-4800 CL40 1.1 V ECC registered RDIMMs validated for the Supermicro H14SSF motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB kit populates four slots at rated DDR5-4800 speed
  • Registered ECC RDIMM design corrects single-bit errors on the fly
  • 1 V operation reduces power draw per module
  • 1Rx8 rank layout matches Supermicro H14SSF population rules
  • CL40 CAS latency meets server memory controller timing requirements

Exact-Match Server Memory Upgrade

This 64GB kit contains four 16GB DDR5-4800 Registered ECC RDIMMs built to the precise 1.1V, CL40, 1Rx8 specification the Supermicro H14SSF memory controller expects. The modules arrive tested as a matched set so the board recognises the full capacity and runs at its rated PC5-38400 speed without manual tuning.

Built for Fully Populated Enterprise Boards

IT teams running the H14SSF with every DIMM slot filled gain the registered buffer's electrical offload and on-the-fly single-bit error correction that prevents silent data corruption. Workstations needing unbuffered UDIMMs, laptops requiring SODIMMs, or any system that cannot accept 288-pin Registered ECC modules should look elsewhere.

Kit-Level Validation Changes the Install

Shipping four sticks as a single validated kit removes the guesswork of mixing loose DIMMs with different rank structures or voltage tolerances. The pre-matched set lets you follow the motherboard manual's population order and reach full 64GB capacity on first boot.

Highlights

  • 64 GB kit populates four slots at rated DDR5-4800 speed
  • Registered ECC RDIMM design corrects single-bit errors on the fly
  • 1 V operation reduces power draw per module
  • 1Rx8 rank layout matches Supermicro H14SSF population rules
  • CL40 CAS latency meets server memory controller timing requirements

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Must my Supermicro H14SSF motherboard have four free 288-pin DDR5 RDIMM slots to install this 64 GB kit?

Yes, the kit contains four 16 GB modules that each occupy one 288-pin DDR5 RDIMM slot, so four empty slots are required for full installation.

Will these CL40 1.1 V registered ECC modules run at DDR5-4800 if my board currently uses slower DDR5 RDIMMs?

The modules are rated for DDR5-4800 (PC5-38400) at CL40 and 1.1 V; the system will operate all populated slots at the highest common speed supported by the memory controller and installed DIMMs.

How can I confirm the kit is running at DDR5-4800 with ECC active after installation?

Check the BIOS memory information or OS hardware report for a speed of 4800 MT/s, CL40 timings, 1.1 V voltage and ECC status shown as enabled or active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.