We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM MR44800-924K1 64GB DDR5 5600 CL46 2Rx4 ECC RDIMM memory upgrade

SKU CH-FYP7-SRPJM

64 GB DDR5-5600 ECC registered RDIMM with CL46 timing and 1.1 V operation, validated for the GIGABYTE MZ73-LM0 motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

Show 24 more configurations
  • 64 GB DDR5 capacity for memory-intensive server workloads
  • 5600 MHz speed with CL46 latency for rated DDR5-5600 performance
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor verified for the GIGABYTE MZ73-LM0 motherboard

Exact-fit 64 GB DDR5-5600 RDIMM

This NEMIX RAM module delivers 64 GB of DDR5 memory rated at 5600 MT/s with CL46 latency and 1.1 V operation. It uses a 288-pin registered ECC design built with 2Rx4 organisation for server and workstation platforms.

Suited for GIGABYTE MZ73-LM0 upgrades.

The module is validated for the GIGABYTE MZ73-LM0 motherboard and requires a platform that accepts registered ECC RDIMMs. Systems limited to unbuffered UDIMMs or SODIMM form factors cannot use this memory.

Single-module 64 GB capacity

One DIMM provides 64 GB, allowing high-density population within the board's slot limits. Registered signalling supports full-speed operation across all populated slots, while ECC corrects single-bit errors. Buyers needing more than the board's maximum supported capacity or a non-ECC unbuffered alternative should look elsewhere.

Highlights

  • 64 GB DDR5 capacity for memory-intensive server workloads
  • 5600 MHz speed with CL46 latency for rated DDR5-5600 performance
  • 2Rx4 Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's memory-controller specification
  • 288-pin RDIMM form factor verified for the GIGABYTE MZ73-LM0 motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard slot is required to install this 288-pin DDR5 RDIMM?

This module uses a 288-pin DDR5 RDIMM form factor and must be installed in a matching registered DIMM slot on a compatible server motherboard.

Will this registered ECC RDIMM work in the same system as older unbuffered DDR5 UDIMMs?

No, registered RDIMMs and unbuffered UDIMMs use different electrical signalling and cannot be mixed on the same motherboard.

How can I verify the kit is running at the rated 5600 MT/s with CL46 latency after installation?

Check the memory speed and timings in the BIOS setup or use a system-information tool such as CPU-Z to confirm DDR5-5600 operation at CL46.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.