We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 64GB (4×16GB) DDR5 4800 ECC RDIMM CL40 1Rx8 1.1V Dell PowerEdge XR5610 memory upgrade

SKU CH-9S78-T354G

Four 16 GB DDR5 ECC registered DIMMs add 64 GB at 4800 MT/s with CL40 latency for Dell PowerEdge XR5610 servers

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity with four 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for server-grade error correction
  • CL40 latency at 1.1 V operating voltage
  • Validated for Dell PowerEdge XR5610 rack server

Dell PowerEdge XR5610 memory kit

This NEMIX RAM kit supplies 64 GB of DDR5 4800 ECC registered memory in four 16 GB modules. The 1Rx8 organisation and 1.1 V operation match the Dell PowerEdge XR5610 platform requirements for server workloads.

IT teams needing validated ECC RDIMM capacity

Suitable for administrators expanding memory in a Dell PowerEdge XR5610 rack server where registered ECC modules are mandatory. Not suited for desktops, workstations or laptops that require unbuffered non-ECC DDR5 memory.

CL40 CAS latency at DDR5 4800

The modules run at CL40 timing with a PC5-38400 data rate. This latency figure determines whether the kit meets the timing budget set by the server BIOS for stable operation.

Highlights

  • 64 GB total capacity with four 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for server-grade error correction
  • CL40 latency at 1.1 V operating voltage
  • Validated for Dell PowerEdge XR5610 rack server

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the Dell PowerEdge XR5610 require all four DIMM slots to be populated for this 64GB kit to operate correctly?

The kit provides four 16GB modules that fill the four slots shown in the server's memory configuration guide for the XR5610.

Will these DDR5 4800 ECC RDIMM modules run at their rated speed if the server currently has slower DDR5 modules installed?

The memory controller will operate all installed modules at the lowest common speed, so mixing with slower DDR5 RDIMMs will reduce the 4800 MT/s rate.

How can I verify the 64GB kit is running at DDR5 4800 with ECC active after installation?

Check the system BIOS or iDRAC interface; both report memory speed as 4800 MT/s and show ECC status as enabled for each 1Rx8 module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.