We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 RDIMM modules, bare black chips, no heat spreader, 288 pins each

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 3200 CL22 1.2V 288-Pin ECC RDIMM Server memory upgrade

SKU CH-66M3-GGRG7

64 GB server kit with four 16 GB DDR4 3200 ECC registered DIMMs at CL22 and 1.2 V for ThinkMate Supermicro systems

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64GB total capacity across four 16GB modules
  • DDR4 3200 speed with CL22 latency for responsive throughput
  • ECC registered design detects and corrects data errors
  • 2V operation reduces power draw in dense servers
  • Validated for ThinkMate Supermicro SuperServer 510P-WT and 110P-WTR

64 GB DDR4 ECC RDIMM kit for ThinkMate servers

This 64 GB kit contains four 16 GB DDR4 3200 registered DIMMs with ECC and CL22 latency. It is built for ThinkMate Supermicro SuperServer 510P-WT, 510P-WTR and 110P-WTR platforms that require registered error-correcting memory. The modules operate at 1.2 V and use a 1Rx8 organisation.

Upgrades from non-ECC or lower-capacity DDR4 RDIMMs

Replace unbuffered or non-ECC modules when your workload demands data integrity and the motherboard requires registered DIMMs. The jump is worth it when your ThinkMate server needs the full 64 GB capacity at 3200 MT/s and the platform specifies PC4-25600 registered memory.

Verify registered DIMM support

Check that your ThinkMate system accepts 288-pin DDR4 RDIMMs and that the BIOS supports 1Rx8 modules at CL22. Confirm the maximum memory per channel and the required slot order before installing all four sticks.

Highlights

  • 64GB total capacity across four 16GB modules
  • DDR4 3200 speed with CL22 latency for responsive throughput
  • ECC registered design detects and corrects data errors
  • 2V operation reduces power draw in dense servers
  • Validated for ThinkMate Supermicro SuperServer 510P-WT and 110P-WTR

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-618K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 288-pin DDR4 RDIMM modules fit my Supermicro SuperServer 510P-WT motherboard slots?

Yes, the 288-pin DDR4 RDIMM form factor matches the memory slots on the listed Supermicro SuperServer 510P-WT and 110P-WTR systems.

Do I need to populate all four channels with this 4x16GB kit for the registered ECC memory to initialise correctly?

Install the four 1Rx8 modules in the slots specified by the Supermicro motherboard manual; registered ECC RDIMMs require correct channel population order to initialise.

How long will the Samsung, Micron or Hynix DRAM chips on these 1.2V modules last under continuous server workloads?

The major OEM DRAM chips are stress-tested under load and covered by a lifetime replacement warranty for the usable life of the server.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.