SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 64 GB DDR4 kit with four 16 GB unbuffered UDIMM modules running at 3200 MHz, CL22 latency and 1.2 V for the ASUS Prime X299-A II motherboard
This 64GB kit contains four 16GB DDR4 modules rated at 3200MT/s with CL22 timings. The sticks are 288-pin unbuffered non-ECC UDIMMs that operate at 1.20V using a 1Rx8 organisation. They are validated for the ASUS Prime X299-A II motherboard.
Builders with an ASUS Prime X299-A II who need a matched four-module kit at the board's native 3200 speed will find this set drop-in compatible. Systems that require ECC or registered memory cannot use these unbuffered non-ECC modules. Buyers needing a different capacity or a lower latency bin should look elsewhere.
The decisive specification is the DDR4 3200 (PC4-25600) rating combined with CL22 latency at the standard 1.20V operating voltage. This matches the ASUS Prime X299-A II's supported memory profile without overclocking. If your board or CPU memory controller cannot run at 3200MT/s, the kit will downclock to the highest common speed.
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Gaming Motherboard Compatible Series Memory |
| Model | ASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
The kit has no heat spreaders and uses standard 1.2 V DDR4 chips, so no scheduled cleaning or component swaps are required once the modules are seated.
The CL22 latency and 1Rx8 single-rank layout set the timing ceiling; sustained throughput will hit the CAS latency wall before voltage or thermal limits.
Running at 1.2 V without heat spreaders keeps module temperatures low, adding negligible heat and zero acoustic noise to the system.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?