We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM sticks, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 3200 CL22 ECC UDIMM SuperMicro B3ST1-CPU-001 memory upgrade

SKU CH-CN96-2TS6R

A 64GB kit of four 16GB DDR4 3200 ECC unbuffered UDIMMs at CL22 and 1.2V for SuperMicro B3ST1-CPU-001 motherboards

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64GB total capacity across four 16GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC unbuffered UDIMM design for data integrity
  • CL22 latency at 1.2V operating voltage
  • 288-pin 2Rx8 layout built for SuperMicro B3ST1-CPU-001

64GB DDR4 3200 ECC kit

This 64GB kit contains four 16GB DDR4 3200 ECC unbuffered UDIMM modules. It is built for SuperMicro motherboards using the B3ST1-CPU-001 platform where error-correcting memory is required. System integrators and IT teams choose it for workloads that demand data integrity.

Fits SuperMicro B3ST1-CPU-001 boards

The modules install directly into the board's 288-pin DDR4 slots and run at 1.2V with CL22 timing. No heat spreaders are fitted, so the DIMMs sit low and leave clearance for standard CPU coolers. ECC support is handled by the motherboard chipset, freeing the system from silent data corruption.

Upgrades from smaller or non-ECC sets

Replacing a partial population or non-ECC memory with this matched 4x16GB kit enables full-channel bandwidth and error correction in one step. The jump is worth it when the platform supports DDR4 3200 ECC UDIMM and the application cannot tolerate uncorrected memory errors.

Highlights

  • 64GB total capacity across four 16GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC unbuffered UDIMM design for data integrity
  • CL22 latency at 1.2V operating voltage
  • 288-pin 2Rx8 layout built for SuperMicro B3ST1-CPU-001

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

How does CL22 latency affect sustained throughput on this DDR4 3200 kit?

CL22 sets the minimum cycle delay for each column access; at DDR4 3200 the kit delivers 25600 MB/s peak bandwidth, and the fixed 22-cycle latency becomes the limiting factor once the memory controller saturates all four 16 GB ranks.

What thermal or acoustic impact should be expected when all four modules run continuously at 1.2 V?

The modules operate at 1.2 V without heat spreaders, so they rely on case airflow; power draw stays within standard DDR4 limits and the kit adds no moving parts, making acoustic impact negligible in a ventilated chassis.

Which motherboard feature must already be present for this 288-pin ECC UDIMM kit to function?

The board must provide DDR4 ECC unbuffered UDIMM slots wired for 2Rx8 organisation; the target platform is the Supermicro B3ST1-CPU-001, which exposes four such slots for the 64 GB kit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.