We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 UDIMM sticks, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 3200 ECC UDIMM CL22 memory upgrade

SKU CH-7Q62-ADW63

A 64 GB kit of four 16 GB DDR4 3200 ECC UDIMM modules running at CL22 and 1.2 V for compatible Supermicro systems

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth rating
  • ECC unbuffered design detects and corrects data errors
  • 2 V operation reduces system power draw
  • Validated for Supermicro X12SAE-5, X12SCA-5F and other listed boards

64GB DDR4 ECC kit for Supermicro servers

This 64GB kit contains four 16GB DDR4 3200 unbuffered ECC UDIMMs built for specific Supermicro motherboards. It targets administrators who need validated memory for supported workstation or server boards. Systems requiring registered DIMMs or higher densities cannot use this kit.

DDR4 3200 unbuffered ECC limits

The modules run at DDR4 3200 with CL22 timing and 1.2V operation. Unbuffered ECC tops out at lower capacities than registered memory and does not support the signal buffering required by some multi-socket platforms. Boards that demand registered DIMMs will not accept these sticks.

Plain green UDIMMs with standard 288-pin layout

No heat spreaders are fitted, so the modules sit low in tight server chassis and rely on case airflow. The 288-pin edge connector matches the DDR4 UDIMM socket keying used on the listed Supermicro models. Four single-rank sticks populate four slots directly without extra cabling or brackets.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with PC4-25600 bandwidth rating
  • ECC unbuffered design detects and corrects data errors
  • 2 V operation reduces system power draw
  • Validated for Supermicro X12SAE-5, X12SCA-5F and other listed boards

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

Is the 64GB kit the right size or should I pick a smaller 16GB module?

The kit contains four 16GB modules for 64GB total; choose it if your board has four slots and you want the full capacity, otherwise select a smaller kit that matches your slot count.

What does DDR4 3200 actually deliver once installed?

The modules run at 3200 MT/s with CL22 latency at 1.20V, giving the rated PC4-25600 bandwidth when the motherboard enables the DDR4 3200 profile.

Does the ECC UDIMM work on standard 288-pin DDR4 slots?

Yes, it uses the 288-pin DDR4 UDIMM form factor with ECC and unbuffered operation, so it fits standard DDR4 DIMM slots that support ECC memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.