We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 3200 ECC Unbuffered UDIMM CL22 288-Pin Kit memory upgrade

SKU CH-P8N6-E27BJ

A 64 GB kit of four 16 GB DDR4 3200 ECC unbuffered UDIMMs at CL22 and 1.2 V for ASRock X570 Taichi motherboards

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed rated at PC4 25600 bandwidth
  • ECC unbuffered design protects data integrity
  • CL22 latency at 1.20 V operating voltage
  • 288-pin UDIMM form factor fits ASRock X570 Taichi

64 GB DDR4 ECC UDIMM kit

This NEMIX RAM kit delivers 64 GB of DDR4 3200 ECC unbuffered memory in four 16 GB modules. It targets system builders and IT professionals who need error-correcting capacity for compatible ASRock motherboards and workstation platforms.

Straightforward 288-pin installation

The modules install like standard UDIMMs and require no special tools. Common issues arise when the motherboard BIOS lacks support for ECC unbuffered DIMMs or when all four slots are populated without verifying the platform's maximum memory speed at full load.

Suited for ECC-capable ASRock platforms

Builders needing registered or load-reduced DIMMs, non-ECC consumer memory, or DDR5 speeds should look elsewhere. This kit also does not suit boards limited to single-rank modules or voltages above 1.20 V.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed rated at PC4 25600 bandwidth
  • ECC unbuffered design protects data integrity
  • CL22 latency at 1.20 V operating voltage
  • 288-pin UDIMM form factor fits ASRock X570 Taichi

Specifications

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Questions about this item

How can I confirm the kit is running at DDR4 3200 CL22 after installation?

Enter the BIOS and check that the memory frequency shows 3200 MT/s with timings set to CL22; the modules operate at 1.20 V so the voltage reading should match.

What does the package contain and is anything else required?

The box includes the 64 GB kit as four 16 GB 288-pin DDR4 ECC unbuffered UDIMMs; no extra parts are needed for a compatible ASRock X570 Taichi board.

Which capacity and speed version should I choose for this motherboard?

This 64 GB kit (4 × 16 GB) at DDR4 3200 PC4-25600 CL22 2Rx8 1.20 V is the exact specification validated for the ASRock X570 Taichi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.