We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM sticks, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 ECC RDIMM TYAN FT65T-B8050 memory upgrade

SKU CH-5GTQ-DKGRQ

A 64 GB DDR5 ECC registered kit with four 16 GB modules running at 4800 MHz CL40 for TYAN FT65T-B8050 servers

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed for high bandwidth server workloads
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw in dense configurations
  • Validated for TYAN FT65T-B8050 motherboard compatibility

64GB DDR5 4800 ECC RDIMM kit

This NEMIX RAM kit provides 64GB of DDR5 4800 registered ECC memory in four 16GB modules. It is built for the TYAN Transport HX FT65T-B8050 server platform. The modules run at 1.1V with CL40 latency and use a 1Rx8 organisation. They are intended for IT professionals who need validated stability in mission-critical environments.

Sustained load behaviour

Each module is stress tested under load before shipping to verify reliability during continuous operation. Registered buffering and on-die ECC protect data integrity across long compute cycles. The 1.1V operating voltage helps maintain thermal headroom when all four slots are populated. No heat spreaders are fitted, so adequate chassis airflow is required to keep temperatures in check.

Installation notes

The 288-pin RDIMM form factor installs in the standard DDR5 slots of the FT65T-B8050 motherboard. Populate all four channels for maximum bandwidth and capacity. Verify the BIOS is current before installation to avoid training failures. This kit will not work in consumer desktop boards or laptops that require unbuffered non-ECC memory.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed for high bandwidth server workloads
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw in dense configurations
  • Validated for TYAN FT65T-B8050 motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesTyan Server/Workstation Motherboard Compatible Series Memory
ModelTyan DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTyan
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does the 1.10V DDR5 4800 kit draw when the server runs continuously?

Each module operates at 1.10V, the standard voltage for DDR5 4800 RDIMMs, so total power scales with the four 16GB sticks installed.

What motherboard slot and chipset support must my TYAN FT65T-B8050 already provide for this 288-pin RDIMM kit?

The board needs four 288-pin DDR5 RDIMM slots and a chipset that accepts registered ECC memory at 4800 MT/s.

Will the CL40 1Rx8 registered modules work in the same channels as older DDR5 RDIMMs I may keep in the FT65T-B8050?

Mixing ranks or latencies can prevent the system from training at 4800 MT/s; the manufacturer validates this 4x16GB kit as a matched set.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.