We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 ECC RDIMM THINKMATE 511E-WR 521E-WR memory upgrade

SKU CH-DZ9G-89CKJ

64 GB ECC registered DDR5 kit (four 16 GB modules) at 4800 MT/s, CL40, 1.1 V, validated for Thinkmate 511E‑WR and 521E‑WR servers

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64GB capacity across four 16GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design for data integrity
  • 1V low-voltage operation reduces power draw
  • Compatible with Thinkmate 511E-WR and 521E-WR servers

ThinkMate DDR5 ECC RDIMM kit

This 64GB kit contains four 16GB DDR5 4800 registered DIMMs built for ThinkMate SuperServer 511E-WR and 521E-WR platforms. Each module operates at 1.10V with CL40 latency and 1Rx8 organisation. The memory is new and validated for server workloads requiring error-correcting code.

Suited for ThinkMate server upgrades

Administrators expanding capacity in 511E-WR or 521E-WR chassis will find the kit a direct fit. Systems that require unbuffered UDIMMs, non-ECC modules or a different pin count cannot use these registered DIMMs. Buyers needing speeds beyond 4800MT/s or lower CAS latency should evaluate other options.

Registered DDR5 for multi-slot servers

The 288-pin RDIMMs plug into compatible ThinkMate motherboards without additional cooling hardware. Registered buffering reduces electrical load on the memory controller, freeing headroom for fully populated slots. ECC circuitry corrects single-bit errors, protecting data integrity in continuous operation.

Highlights

  • 64GB capacity across four 16GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design for data integrity
  • 1V low-voltage operation reduces power draw
  • Compatible with Thinkmate 511E-WR and 521E-WR servers

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Do I need a THINKMATE Supermicro SuperServer 511E-WR or 521E-WR system to install this 64GB kit?

Yes, this 4 x 16GB DDR5 4800 CL40 ECC RDIMM kit is validated for the THINKMATE SuperServer 511E-WR and 521E-WR platforms and requires a motherboard with 288-pin DDR5 RDIMM slots.

Can I add this registered ECC kit alongside non-ECC UDIMMs already in the server?

No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC UDIMMs; the memory controller requires all installed modules to be registered ECC RDIMMs.

How can I confirm the kit is running at DDR5 4800 with CL40 timings after installation?

Enter the system BIOS or use a hardware information utility to verify the memory reports 4800 MT/s, CL40 latency, 1.10 V and registered ECC operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.