We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800MHz CL40 ECC RDIMM memory upgrade

SKU CH-QVP4-SV4GG

64 GB DDR5 ECC registered server memory kit with four 16 GB modules at 4800 MHz CL40 for Thinkmate workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 MHz speed rated at PC5-38400
  • ECC registered RDIMM for data integrity in servers
  • 1 V operating voltage for efficient power use
  • 288-pin 1Rx8 form factor fits compatible ThinkMate workstations

64GB DDR5 ECC RDIMM kit

This 64GB kit contains four 16GB DDR5 modules rated at 4800MHz with CL40 latency. Each stick is a 1Rx8 registered DIMM operating at 1.1V with ECC error correction. The modules use 288-pin DDR5 RDIMM form factor and are validated for Thinkmate GPX-XS8-24S4-4GPU workstation compatibility.

Suited for registered-memory servers

This memory targets administrators upgrading Thinkmate workstations that require registered ECC DDR5. It is not for desktop PCs or consumer motherboards that accept only unbuffered non-ECC modules. Buyers needing higher capacities per slot or different speeds should verify their platform's qualified vendor list before ordering.

Check motherboard DDR5 RDIMM support

Confirm your workstation supports 288-pin DDR5 RDIMM modules at 4800MHz with 1.1V operation. Verify the system accepts 1Rx8 registered ECC configuration and has four available slots for this 4-module kit. Consult the hardware manual for exact population rules and maximum supported capacity per channel.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 MHz speed rated at PC5-38400
  • ECC registered RDIMM for data integrity in servers
  • 1 V operating voltage for efficient power use
  • 288-pin 1Rx8 form factor fits compatible ThinkMate workstations

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the THINKMATE GPX-XS8-24S4-4GPU workstation need a DDR5-capable motherboard to use this 4800 MHz ECC RDIMM kit?

Yes, the modules are 288-pin DDR5 RDIMMs that only fit and function in DDR5 motherboard slots.

Can I populate the remaining DIMM slots with older DDR5 4800 MHz ECC RDIMMs of the same speed and rank?

Mixing modules of identical speed, voltage, rank and ECC type is generally supported, but the system will run at the lowest common timing.

How can I verify the kit is running at 4800 MHz with CL40 timings after installation?

Check the memory speed and latency in the BIOS setup or use a tool such as CPU-Z to confirm DDR5-4800 and CL40 operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.