We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connectors and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR4 2933 CL21 ECC RDIMM 2Rx4 memory upgrade

SKU CH-70M9-FT4N0

A 64 GB DDR4 ECC registered DIMM running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity64GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB capacity enables large server workloads
  • DDR4 2933 MHz speed supports high-throughput data processing
  • ECC registered design protects data integrity in critical systems
  • 2 V operation reduces power draw per module
  • 2Rx4 288-pin RDIMM form factor fits compatible Micron platforms

64GB DDR4 ECC RDIMM for Micron servers

This 64GB DDR4 2933MHz registered DIMM targets IT professionals upgrading compatible Micron servers and workstations. The module operates at 1.2V with CL21 latency and uses a 2Rx4 organisation. It is built with major OEM chips from Samsung, Micron or Hynix and carries ECC for data integrity.

Registered ECC design and OEM chip selection

The registered buffer reduces electrical load on the memory controller, allowing higher capacities per channel. ECC corrects single-bit errors to protect mission-critical workloads. Chips sourced from Samsung, Micron or Hynix are stress tested under load before shipment. No heat spreader is fitted, so airflow in the chassis must be adequate.

Single 64GB module at 2933MHz

One 288-pin RDIMM provides 64GB of capacity, leaving remaining slots free for further expansion. The PC4-23400 rating delivers 2933MT/s bandwidth for virtualisation, database and compute tasks. Systems requiring more than one module per channel or higher frequencies will need different parts.

Highlights

  • 64 GB capacity enables large server workloads
  • DDR4 2933 MHz speed supports high-throughput data processing
  • ECC registered design protects data integrity in critical systems
  • 2 V operation reduces power draw per module
  • 2Rx4 288-pin RDIMM form factor fits compatible Micron platforms

Specifications

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-924K1
Capacity64GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will the 2Rx4 rank configuration require any firmware updates or DIMM replacements down the line?

The 2Rx4 organisation is a fixed hardware characteristic of this 64 GB module; no firmware changes or rank alterations are possible after purchase.

At continuous load, does the CL21 latency or the 2933 MT/s data rate become the bottleneck first?

The module operates at its rated 2933 MT/s with CL21 timings; under sustained use the DDR4 interface runs at that speed and latency without throttling.

How much heat and power does a single 1.20 V 64 GB RDIMM produce when running 24/7 in a server chassis?

At the specified 1.20 V the module draws standard DDR4 registered DIMM power and relies on chassis airflow; no heat spreader is fitted, so adequate case cooling is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.