SK hynix HMA42GR7AFR4N-TF 16GB DDR4 2133MHz CL15 ECC Registered Dual Rank 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 64GB DDR4 2933 ECC LRDIMM module designed for the Apple Mac Pro Rack 2020
This NEMIX RAM module adds 64GB of DDR4 2933 memory to the Apple Mac Pro Rack 2020. It uses a 288-pin LRDIMM form factor with ECC and load-reduced architecture. The single 64GB stick operates at 1.20V with CL21 latency and a 4Rx4 rank configuration.
The module runs at the standard DDR4 voltage of 1.20V without a heat spreader. Load-reduced buffering reduces electrical load on the memory controller during typical workloads. Passive cooling relies on system airflow inside the Mac Pro Rack enclosure.
ECC circuitry corrects single-bit errors continuously during extended operations. The 4Rx4 organisation and load-reduced design maintain signal integrity across all ranks under heavy memory pressure. Modules are stress tested under load by the manufacturer to verify stability for mission-critical environments.
| Brand | NEMIX RAM |
|---|---|
| Series | Apple Mac Pro Compatible Series Memory |
| Model | Apple DDR4 2933MHZ ECC LRDIMM Load Reduced Server Memory |
| Part Number | ML23400-944K1 |
| Capacity | 64GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Apple |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 LRDIMM |
| Rank | 4Rx4 |
| Features | DDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR4 2933MHZ PC4-23400 4Rx4 1.2V CL21 288-PIN ECC LRDIMM Load Reduced Server Memory |
Power down, unplug, slide the top cover latch, remove the MPX module tray, unlock the DIMM ejectors, align the 288-pin notch, press firmly until both latches click, reseat the tray, close the cover, then run Apple Diagnostics to confirm all 64GB register at 2933MHz.
No user-serviceable parts exist; the module is sealed and passively cooled. If a correctable ECC error count climbs in system logs, replace the stick — otherwise it runs for the system life.
The memory controller's 2933MHz ceiling caps throughput; thermal throttling is unlikely because LRDIMM buffering reduces electrical load and the chassis airflow handles the 1.2V power envelope.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?