We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 RDIMM module, no heat spreader, 64GB 2Rx4

NEMIX RAM

NEMIX RAM 64GB DDR4 3200 ECC RDIMM 2Rx4 Supermicro H11SSL-NC memory upgrade

SKU CH-MG5B-N28N8

64 GB DDR4 3200 ECC registered DIMM, 2Rx4 CL22 at 1.2 V for Supermicro H11SSL-NC EPYC systems

  • Capacity64GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64GB capacity expands server memory headroom
  • DDR4 3200 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 2V operation reduces power consumption
  • Supermicro H11SSL-NC compatibility ensures reliable integration

64GB DDR4 ECC RDIMM for Supermicro H11SSL-NC

This 64GB DDR4 3200 registered DIMM is built for the Supermicro H11SSL-NC motherboard and AMD EPYC platforms. It targets server and workstation administrators who need validated ECC memory for mission-critical workloads. The module uses major OEM chips from Samsung, Micron or Hynix and runs at 1.20V.

Sustained load stability with CL22 registered timing

The module operates at DDR4 3200 PC4-25600 with a CL22 latency and 2Rx4 organisation. Registered buffering reduces electrical load on the memory controller during continuous operation. All units are stress-tested under load before shipment to verify reliability in 24/7 environments. ECC detection corrects single-bit errors without interrupting service.

Simple DIMM installation with manual guidance

The 288-pin RDIMM installs in standard DDR4 slots on the H11SSL-NC board. No heat spreader is fitted, so clearance inside dense chassis is not affected. Installation typically takes minutes; the owner's manual should be consulted for population rules and BIOS settings. Mixing with unregistered or non-ECC modules is not supported.

Highlights

  • 64GB capacity expands server memory headroom
  • DDR4 3200 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 2V operation reduces power consumption
  • Supermicro H11SSL-NC compatibility ensures reliable integration

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-924K1
Capacity64GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How much power does the 1.2 V DDR4 3200 module draw under continuous server load?

The module operates at 1.2 V with CL22 latency; registered ECC RDIMMs at this voltage typically run cool and draw minimal power during all-day workloads.

What motherboard slot and chipset are required for this 288-pin 2Rx4 RDIMM to function?

It needs a Supermicro H11SSL-NC or compatible AMD EPYC server board with DDR4 RDIMM slots and registered ECC support.

Will this CL22 3200 MHz stick run stably alongside slower DDR4 modules already installed in the same system?

The memory will down-clock to match the slowest installed module while maintaining ECC and registered operation for stability.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.