We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board 288-pin DDR5 RDIMM 64GB module

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 ECC RDIMM Dell PowerEdge XE8640 memory upgrade

SKU CH-WZYK-K5XCY

64 GB DDR5 4800 CL40 2Rx4 ECC RDIMM at 1.1 V for Dell PowerEdge XE8640 servers

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64GB capacity expands server memory for heavy workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design corrects errors for reliability
  • 1V operation reduces power consumption per module
  • 288-pin RDIMM fits Dell PowerEdge XE8640 slots

64 GB DDR5 4800 ECC RDIMM

This 64 GB DDR5 4800 registered DIMM adds ECC-protected capacity to a Dell PowerEdge XE8640 rack server. The module runs at PC5-38400 speed with CL40 latency and operates at 1.1 V. It uses a 2Rx4 organisation on a 288-pin form factor without a heat spreader.

Suited for XE8640 memory expansion

IT teams scaling memory in a Dell PowerEdge XE8640 will find this module validated for that platform. Buyers needing unbuffered UDIMMs, non-ECC memory, lower-density sticks or a different server model should look elsewhere.

Fills a 288-pin DDR5 RDIMM slot

The stick plugs directly into an available DDR5 RDIMM slot on the XE8640 motherboard and draws power at the standard 1.1 V. No extra cooling hardware or adapters are required, leaving other slots free for further upgrades.

Highlights

  • 64GB capacity expands server memory for heavy workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design corrects errors for reliability
  • 1V operation reduces power consumption per module
  • 288-pin RDIMM fits Dell PowerEdge XE8640 slots

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does my Dell PowerEdge XE8640 need a specific BIOS version to recognise the 64GB DDR5 4800 CL40 ECC RDIMM?

The module is validated for the Dell PowerEdge XE8640; install it in a supported slot and the system will detect the 64GB capacity at 4800 MT/s with CL40 timing.

Can I keep my existing DDR5 4800 ECC RDIMMs and add this 64GB 2Rx4 module without changing the memory configuration?

Yes, if the installed modules are also DDR5 4800 ECC RDIMMs the server will train all channels to 4800 MT/s; mixed ranks are supported per Dell's memory population rules.

How do I confirm the new 64GB DDR5 4800 CL40 ECC RDIMM is running at the correct speed and voltage after installation?

Enter the BIOS or iDRAC and verify the memory shows 64GB, 4800 MT/s, 1.1 V and ECC active for the new module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.