We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR5 RDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-7D9B-MC1YK

64 GB DDR5 registered ECC RDIMM running at 5600 MT/s with CL46 latency and 1.1 V for Supermicro servers

  • Capacity64GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection safeguards data integrity in critical workloads
  • 5600 MT/s DDR5 speed accelerates server responsiveness
  • Registered 2Rx4 architecture scales to 64GB per module
  • 1V operation lowers power draw under load
  • Validated for Supermicro B13DET motherboard compatibility

64GB DDR5 5600 ECC RDIMM for SuperMicro B13DET

This single 64GB DDR5 5600 module delivers registered ECC memory for the SuperMicro B13DET motherboard. It operates at 1.1V with CL46 latency and a 2Rx4 organisation. The 288-pin RDIMM form factor fits server and workstation platforms that require registered DIMMs. It is built with major OEM DRAM chips and validated for the specified system.

Server and workstation builders needing registered

This module suits administrators upgrading a SuperMicro B13DET platform that demands registered ECC DDR5 at 5600 MT/s. It is not for desktop boards that accept only unbuffered non-ECC memory. It is not for systems limited to lower DDR5 speeds or different pin counts. Buyers who need multiple modules should verify the motherboard slot population rules before ordering.

Fits a registered DDR5 slot on the target board

The DIMM installs directly into a 288-pin DDR5 RDIMM slot on the SuperMicro B13DET. No heat spreader is present, so airflow across the module is unimpeded. The 1.1V operation keeps power draw within standard DDR5 registered limits. The single-module kit leaves remaining slots free for future capacity expansion, subject to the platform memory configuration guidelines.

Highlights

  • ECC protection safeguards data integrity in critical workloads
  • 5600 MT/s DDR5 speed accelerates server responsiveness
  • Registered 2Rx4 architecture scales to 64GB per module
  • 1V operation lowers power draw under load
  • Validated for Supermicro B13DET motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What motherboard slot and DDR generation does this 288-pin DDR5 RDIMM require?

It fits a 288-pin DDR5 RDIMM slot on a motherboard that supports registered ECC memory at 1.1 V.

Will this 5600 CL46 module run at its rated speed if I keep slower DDR5 DIMMs in the other channels?

The system will down-clock all DIMMs to the lowest common speed and latency, so the 5600 CL46 module will run at the slower DIMMs' rate.

How can I confirm the module is detected as 64 GB ECC registered at 5600 MT/s after installation?

Check the BIOS memory information or run a tool such as dmidecode; it should show 64 GB, DDR5-5600, ECC registered, 2Rx4, CL46.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.