We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 ECC RDIMM 2Rx4 CL46 1.1V SuperMicro B13SEG memory upgrade

SKU CH-TWC6-87YMQ

64 GB DDR5 ECC registered RDIMM at 5600 MT/s with CL46 latency and 1.1 V operation for SuperMicro B13SEG servers

  • Capacity64GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity expands server memory headroom
  • DDR5 5600 speed enables high-throughput data processing
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw per module
  • Validated for SuperMicro B13SEG motherboard compatibility

64GB DDR5 5600 ECC RDIMM for SuperMicro B13SEG

This 64GB DDR5 5600 registered DIMM is built for SuperMicro B13SEG motherboards. It targets IT professionals and system builders who need ECC protection and registered signalling for mission-critical servers or workstations. The module runs at 1.1V with CL46 latency and uses a 2Rx4 organisation.

Verify DDR5 RDIMM support and slot population rules

Confirm that your B13SEG system accepts 288-pin DDR5 registered ECC modules at 5600 MT/s. Check the motherboard manual for maximum capacity per channel, supported rank configurations and any required BIOS revision before ordering. Ensure the platform expects registered DIMMs rather than unbuffered memory.

Fits SuperMicro B13SEG servers

The module plugs directly into 288-pin DDR5 RDIMM slots and draws 1.1V. Its registered buffer reduces electrical load on the memory controller, freeing headroom for larger memory populations. No heat spreader is fitted, so airflow across the module must be provided by the chassis cooling design.

Highlights

  • 64 GB capacity expands server memory headroom
  • DDR5 5600 speed enables high-throughput data processing
  • ECC registered design protects data integrity under load
  • 1 V operation reduces power draw per module
  • Validated for SuperMicro B13SEG motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the kit contain only the 64 GB DDR5 5600 CL46 2Rx4 1.1 V 288-pin ECC RDIMM or are cables or brackets included?

The package contains one 64 GB DDR5 5600 PC5-44800 2Rx4 1.10 V CL46 288-pin ECC registered RDIMM and nothing else.

Should I choose the 4800 MHz or the 5600 MHz version for a SuperMicro B13SEG system?

The module is rated at DDR5 5600 (PC5-44800) and is validated for the SuperMicro B13SEG motherboard.

What does the 5600 MT/s rating mean once the DIMM is installed in a B13SEG server?

The memory will run at up to 5600 MT/s with CL46 latency at 1.10 V, delivering the rated bandwidth for registered ECC workloads on the B13SEG platform.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.