We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB DDR5 6400 4Rx4 CL52 1.1V ECC RDIMM Supermicro X14SDV-32C-SP3F memory upgrade

SKU CH-CS8P-8VXJB

64GB DDR5-6400 ECC registered RDIMM with CL52 timing and 1.1V operation, validated for Supermicro X14SDV-32C-SP3F motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact-match DDR5-6400 upgrade runs at rated speed
  • 64 GB 4Rx4 ECC RDIMM fits Supermicro X14SDV-32C-SP3F
  • Registered buffer enables full-capacity population
  • ECC corrects single-bit errors preventing data corruption
  • 10 V CL52 288-pin DDR5 specification met

Supermicro X14SDV-32C-SP3F Memory Upgrade

This 64 GB DDR5-6400 RDIMM is built for the Supermicro X14SDV-32C-SP3F motherboard. It delivers registered ECC memory that the server's memory controller recognises at full capacity and rated speed. The module targets administrators who need to expand or replace memory in this specific platform.

Registered ECC RDIMM Build and 288-Pin Fit

Registered architecture buffers the command and address signals so every slot runs fully populated without overloading the memory controller. ECC corrects single-bit errors on the fly to stop silent data corruption and unplanned reboots. The 288-pin DDR5 RDIMM form factor matches the board's physical and electrical requirements exactly.

Replacing Slower or Smaller DDR5 RDIMMs

This kit replaces lower-capacity or slower DDR5 RDIMMs when the workload demands 64 GB per module at 6400 MT/s with CL52 timing at 1.1 V. The jump is worth it when the server's memory-population rules allow this rank and voltage combination and the application benefits from the higher throughput and density.

Highlights

  • Exact-match DDR5-6400 upgrade runs at rated speed
  • 64 GB 4Rx4 ECC RDIMM fits Supermicro X14SDV-32C-SP3F
  • Registered buffer enables full-capacity population
  • ECC corrects single-bit errors preventing data corruption
  • 10 V CL52 288-pin DDR5 specification met

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR5 6400 interface on the Supermicro X14SDV-32C-SP3F run at the full 6400 MT/s with this 4Rx4 module?

Yes, the module is spec-matched to the board's DDR5 6400 (PC5-51200) controller so it operates at the rated 6400 MT/s when installed in a supported slot.

Will the 288-pin RDIMM form factor fit the Supermicro X14SDV-32C-SP3F memory slots?

Yes, the board requires 288-pin Registered DIMMs and this module matches that exact keying and height.

What is the correct installation step for this 4Rx4 RDIMM on the Supermicro X14SDV-32C-SP3F?

Follow the motherboard manual's population order; the common mistake is skipping the designated first slot for each channel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.