We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board DDR5 RDIMM memory module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 64GB DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM 288-pin memory upgrade for Supermicro H14SST-GE

SKU CH-22G6-M92WH

64 GB DDR5 6400 RDIMM with ECC and registered buffering, built to the exact rank, voltage and timing the Supermicro H14SST-GE requires

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact-match DDR5-6400 CL52 1.1 V for full-rated speed
  • Registered 2Rx4 ECC offloads controller and corrects bit errors
  • 64 GB 288-pin RDIMM fits Supermicro H14SST-GE slot
  • Major OEM Samsung Micron Hynix chips ensure enterprise stability
  • Lifetime replacement warranty with free US-based technical support

Exact-match DDR5 RDIMM for Supermicro H14SST-GE

This 64GB DDR5 6400 module is built to the precise rank, voltage and timing the Supermicro H14SST-GE memory controller expects. It installs as a 288-pin Registered ECC DIMM so the board recognises full capacity at rated speed.

Capacity and registered headroom

The 64GB 2Rx4 configuration lets the server populate every slot at full density while the registered architecture offloads the memory controller. ECC corrects single-bit errors on the fly, preventing silent data corruption during sustained workloads.

CL52 1.1V DDR5 6400 specification

Rated at DDR5 6400 (PC5-51200) with CL52 latency at 1.1V, this module will only run at its labelled speed and timing when the platform supports that exact data rate. Buyers whose systems require a different DDR5 speed or voltage must choose a matching part instead.

Highlights

  • Exact-match DDR5-6400 CL52 1.1 V for full-rated speed
  • Registered 2Rx4 ECC offloads controller and corrects bit errors
  • 64 GB 288-pin RDIMM fits Supermicro H14SST-GE slot
  • Major OEM Samsung Micron Hynix chips ensure enterprise stability
  • Lifetime replacement warranty with free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Will this 2Rx4 DDR5 6400 RDIMM work in a Supermicro H14SST-GE that already has 1Rx8 modules installed?

The board requires registered DDR5 RDIMMs; mixing ranks is allowed only if the manual lists the specific population order, so check the motherboard guide before combining 2Rx4 and 1Rx8 sticks.

How can I confirm the memory is running at 6400 MT/s with CL52 and ECC active after installation?

Enter BIOS or use a tool like dmidecode to verify speed shows 6400 MT/s, CAS latency reads 52, and ECC status reports enabled and operational.

Does the package include only the 64 GB DDR5 6400 2Rx4 ECC RDIMM, or are heat spreaders and cables also supplied?

The kit contains the single 64 GB DDR5 6400 CL52 1.1 V 2Rx4 288-pin ECC registered RDIMM; no heat spreader, cables or extra accessories are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.