We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 768GB (12x64GB) DDR5 4800 CL40 ECC RDIMM THINKMATE 521C-NR memory upgrade

SKU CH-DWE8-DJDQ8

768 GB DDR5 server memory kit with twelve 64 GB registered ECC modules at 4800 MHz CL40 for Thinkmate 521C-NR

  • Capacity768GB (12 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Massive 768 GB capacity from twelve 64 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered design protects data integrity
  • Low 1.1 V operation reduces server power draw
  • Validated for ThinkMate SuperServer 521C-NR systems

System-Specific DDR5 Kit

This NEMIX RAM kit delivers 768GB across twelve 64GB DDR5 modules built for the THINKMATE SuperServer 521C-NR. It targets administrators scaling memory in that exact platform where registered ECC DIMMs are required.

Registered ECC Build

Each 288-pin RDIMM uses a 2Rx4 organisation and runs at 1.10V without a heat spreader. The registered buffer and on-die ECC protect data integrity in multi-socket workloads, while the low-profile form factor fits dense server chassis.

4800 MT/s CL40 Speed

The memory operates at DDR5 4800 (PC5-38400) with CAS latency 40. That single speed grade determines whether the kit matches the server’s qualified memory list; no other frequency or timing is supported by this part number.

Highlights

  • Massive 768 GB capacity from twelve 64 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • ECC registered design protects data integrity
  • Low 1.1 V operation reduces server power draw
  • Validated for ThinkMate SuperServer 521C-NR systems

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K12
Capacity768GB (12 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content768GB (12X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the DDR5 4800 interface run at the full 4800 MT/s in the ThinkMate 521C-NR?

Yes, the kit is rated DDR5 4800 (PC5-38400) and will operate at that speed when the server’s memory controller supports it.

What physical slot and clearance does this 288-pin RDIMM kit require?

Each module uses a standard 288-pin DDR5 RDIMM form factor and fits the 521C-NR’s DIMM slots; no heat spreader is present so low-profile clearance is not an issue.

How are the 12 modules installed and what step is often missed?

Populate all twelve slots following the 521C-NR’s population guide, then verify in BIOS that ECC and registered mode are active — skipping the BIOS check is the common mistake.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.