We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 768GB (6x128GB) DDR5-6400 ECC Registered RDIMM CL52 1.1V Supermicro H13SSW memory upgrade

SKU CH-JQB3-VXCTY

Six 128 GB DDR5 RDIMMs deliver 768 GB of registered ECC memory at 6400 MT/s and CL52 for the Supermicro H13SSW motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 768 GB total capacity from six 128 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth for demanding workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro H13SSW compatibility

Exact-fit 768 GB DDR5 kit

This NEMIX RAM kit delivers 768 GB across six 128 GB DDR5-6400 Registered ECC RDIMMs. It is built for the Supermicro H13SSW motherboard and matches the board’s required rank, voltage and timing so the memory controller recognises the full capacity at rated speed.

Suits fully populated H13SSW builds

Ideal for administrators filling every slot on a Supermicro H13SSW server where registered ECC memory is mandatory. Not for systems that only accept unbuffered UDIMMs or SODIMMs, or for platforms that cannot address 128 GB per module.

Straightforward 288-pin installation

Modules slot into the 288-pin RDIMM sockets following the motherboard’s population order. Common issues arise when the population sequence is ignored or when the BIOS is not updated to support the full 768 GB configuration.

Highlights

  • 768 GB total capacity from six 128 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated bandwidth for demanding workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro H13SSW compatibility

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Does this kit require a Supermicro H13SSW motherboard with 288-pin DDR5 RDIMM slots to work?

Yes, the 768 GB kit contains six 128 GB DDR5-6400 registered ECC RDIMMs built for the 288-pin slots on a Supermicro H13SSW motherboard; the board must support registered memory and the rated 1.1 V operation.

Can I mix these 2Rx4 CL52 modules with older DDR5 RDIMMs that have different ranks or latencies?

Mixing ranks or CAS latencies is not recommended; the motherboard will typically clock all channels to the slowest common timing, so population rules in the H13SSW manual should be followed for full 768 GB capacity at 6400 MT/s.

How can I confirm the kit is running at 6400 MT/s with ECC active after installation?

Enter the BIOS or use a hardware-info utility to verify the memory frequency shows 6400 MT/s, the voltage reads 1.1 V, and ECC status reports enabled and functional across all six DIMMs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.