We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 768GB (8x96GB) DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM SuperMicro X14SBI-F memory upgrade

SKU CH-AAWP-K1YZJ

Eight 96 GB registered DDR5 ECC modules at 6400 MT/s CL52, 1.1 V, built for SuperMicro X14SBI-F servers

  • Capacity768GB (8 x 96GB)
  • SpeedDDR5 6400 (PC5 51200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 768GB total capacity from eight 96GB modules for large-scale workloads
  • DDR5 6400 speed with CL52 latency for high-throughput server performance
  • ECC registered RDIMM design ensures data integrity under heavy load
  • 1V operating voltage reduces power draw across all installed DIMMs
  • Validated for SuperMicro X14SBI-F motherboards to guarantee compatibility

System-Specific DDR5 Server Kit

This 768GB kit contains eight 96GB DDR5 6400 ECC RDIMM modules built for the SuperMicro X14SBI-F platform. Registered buffering and on-die ECC protect data integrity in continuous server workloads. IT teams specify this density when virtualisation hosts or database nodes demand maximum capacity per channel. The CL52 latency and 1.10V operation match the board's qualified memory profile.

DDR5 6400 Registered Interface Limits

DDR5 6400 (PC5-51200) sets the peak transfer rate; actual throughput depends on the memory controller and populated slot count. Registered RDIMMs add one cycle of command buffering, which stabilises heavy loads but does not reduce the CAS latency of 52 cycles. The 288-pin form factor fits only DDR5 server sockets; it cannot be used in desktop or laptop platforms. Mixing ranks or speeds will force the controller to downclock the entire array.

96GB 2Rx4 Module Density Decides Fit

Each 96GB 2Rx4 module occupies a single DIMM slot, so eight slots are required to reach 768GB. Systems with fewer than eight DDR5 RDIMM slots cannot use this kit at full capacity. Boards that support only 1Rx8 or 2Rx8 organisations may not recognise the 2Rx4 density. Verify the X14SBI-F memory population rules before ordering to avoid a configuration that will not POST.

Highlights

  • 768GB total capacity from eight 96GB modules for large-scale workloads
  • DDR5 6400 speed with CL52 latency for high-throughput server performance
  • ECC registered RDIMM design ensures data integrity under heavy load
  • 1V operating voltage reduces power draw across all installed DIMMs
  • Validated for SuperMicro X14SBI-F motherboards to guarantee compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 6400MHZ ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K8
Capacity768GB (8 x 96GB)
SpeedDDR5 6400 (PC5 51200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content768GB (8X96GB) DDR5 6400MHZ PC5-51200 2Rx4 1.1V CL52 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Should I choose the 8-module 768GB kit or a smaller capacity for my SuperMicro X14SBI-F?

The kit provides 768GB total using eight 96GB modules, filling eight slots on the X14SBI-F. Choose this when the workload needs maximum registered ECC capacity; a smaller kit leaves slots open for later expansion.

What does the 6400 speed rating mean once the modules are installed in the server?

The modules run at DDR5 6400 with CL52 latency at 1.1V, delivering the rated transfer rate when the platform memory controller supports that speed.

How does the 288-pin RDIMM interface and registered design affect what the memory controller can do?

The 288-pin DDR5 RDIMM form factor with registered buffering reduces electrical load on the memory controller, allowing all eight 2Rx4 modules to operate at the specified 6400 speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.