We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 768GB DDR5 6400 CL52 2Rx4 ECC RDIMM 8x96GB Supermicro H13SST-G memory upgrade

SKU CH-6C04-HS2PN

8-module kit delivers 768GB DDR5-6400 ECC registered memory with CL52 timing and 1.1V operation for Supermicro H13SST-G servers

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-6400 spec match so the server boots at full 768GB capacity
  • Registered ECC RDIMM prevents silent data corruption across all 8 modules
  • 2Rx4 dual-rank layout maximises density within each 96GB module
  • 1V standard voltage keeps power draw predictable at rated speed
  • Validated for Supermicro H13SST-G motherboard memory-population rules

Supermicro H13SST-G memory kit

This 768GB kit contains eight 96GB DDR5 6400 registered ECC RDIMMs built for the Supermicro H13SST-G motherboard. The modules run at 1.10V with CL52 latency and a 2Rx4 rank layout that matches the board's memory controller requirements. Each DIMM uses a 288-pin registered form factor so the system recognises the full capacity at rated speed.

Server builds needing maximum registered capacity

The kit suits administrators populating every slot on an H13SST-G with registered ECC memory for production workloads. Builds that require unbuffered UDIMMs, SODIMMs, lower voltages, or non-ECC modules will not be compatible with this specific configuration.

2Rx4 registered ECC rank structure

The dual-rank 2Rx4 organisation lets the memory controller address the full 768GB across all eight slots while ECC corrects single-bit errors in real time. This rank layout is the decisive factor for stable operation at the rated 6400 transfer rate on the target platform.

Highlights

  • Exact DDR5-6400 spec match so the server boots at full 768GB capacity
  • Registered ECC RDIMM prevents silent data corruption across all 8 modules
  • 2Rx4 dual-rank layout maximises density within each 96GB module
  • 1V standard voltage keeps power draw predictable at rated speed
  • Validated for Supermicro H13SST-G motherboard memory-population rules

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Questions about this item

Should I choose the 8x96GB kit or a smaller capacity for my Supermicro H13SST-G?

The 8x96GB kit fills all eight slots with 768GB total. Choose it only if your motherboard manual approves full population at DDR5 6400; otherwise a smaller kit may run at higher speeds.

What does DDR5 6400 CL52 deliver once installed in the H13SST-G?

The modules run at 6400 MT/s with 52-cycle CAS latency at 1.10V, giving the maximum rated throughput this board supports when all slots are populated with registered ECC DIMMs.

How does the 288-pin RDIMM interface and registered ECC design affect real-world limits?

Registered buffering lets all eight slots operate at full 6400 speed, while ECC corrects single-bit errors on the fly; the 288-pin DDR5 RDIMM form factor is the only type the H13SST-G accepts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.