We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 260-PIN SODIMM POSIFLEX HS-6514

SKU CH-93B9-663N6

8GB DDR4 2400 CL17 SODIMM module built for the POSIFLEX HS-6514 terminal

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX HS-6514 all-in-one terminals
  • 8 GB DDR4 2400 MHz CL17 single module
  • Low 1.20 V power draw for efficiency
  • 260-pin SODIMM fits compact POS chassis
  • Built with major OEM Samsung Micron Hynix chips

POSIFLEX HS-6514 terminal memory upgrade

This NEMIX RAM module is an 8 GB DDR4 SODIMM built specifically for the POSIFLEX HS-6514 high-end compact all-in-one terminal with replaceable printer. It runs at 2400 MHz with a CAS latency of 17 and operates at 1.2 V. The unbuffered, non-ECC design matches the terminal’s original memory specification.

Replacing slower or smaller DDR4 SODIMMs

If the terminal currently uses a lower-capacity DDR4 module or one rated below PC4-19200, this 8 GB stick restores the intended memory bandwidth for point-of-sale workloads. The upgrade is worthwhile when the system shows sluggish multitasking or when the application suite demands more than the existing memory can provide.

Check terminal memory slot and maximum capacity

Verify that the HS-6514 has a free 260-pin SODIMM slot or that you are replacing the only installed module. Confirm the terminal’s maximum supported memory per slot and in total before ordering. Ensure the BIOS is up to date so the new module is recognised at its rated speed.

Highlights

  • Designed for POSIFLEX HS-6514 all-in-one terminals
  • 8 GB DDR4 2400 MHz CL17 single module
  • Low 1.20 V power draw for efficiency
  • 260-pin SODIMM fits compact POS chassis
  • Built with major OEM Samsung Micron Hynix chips

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will this 260-pin SODIMM fit the memory slot in a POSIFLEX HS-6514 terminal?

Yes, the module is a 260-pin DDR4 SODIMM built to match the POSIFLEX HS-6514 slot exactly.

What is the correct way to seat the module, and what step do people often miss?

Insert the SODIMM at an angle until the gold contacts disappear, then press down firmly until both side clips click into the notches.

Does this 1.20 V DDR4 module need any future maintenance or replacement?

No, it is a non-ECC unbuffered SODIMM with no moving parts and no heat spreader, so it requires no ongoing maintenance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.