We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2666MHz CL19 2Rx8 SODIMM QNAP NAS Memory Upgrade

SKU CH-VFJ4-ETC27

8 GB DDR4 SODIMM running at 2666 MHz CL19, validated for QNAP NAS compatibility

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity expands NAS multitasking headroom
  • DDR4 2666 speed matches QNAP specifications
  • 20V low voltage reduces power draw
  • 260-pin SODIMM fits QNAP NAS slots
  • CL19 latency supports stable operation

QNAP NAS 8 GB DDR4 2666 SODIMM

This module adds eight gigabytes of DDR4-2666 memory to compatible QNAP NAS units. It targets administrators who need extra capacity for virtualization, caching or multi-user file services without replacing the entire appliance.

Tool-free slot access and keyed 260-pin design

The SODIMM slides into the NAS memory slot and locks with the side clips; no screws or cables are involved. The main installation risk is inserting the stick at an angle, which can bend the gold contacts or leave the module partially seated.

DDR4-2666 bandwidth and non-ECC operation

The PC4-21300 interface caps throughput at the rated speed, so heavier workloads will not exceed that ceiling. Because the module is non-ECC, it cannot correct single-bit errors, making it unsuitable for environments that require error-correcting memory.

Highlights

  • 8GB capacity expands NAS multitasking headroom
  • DDR4 2666 speed matches QNAP specifications
  • 20V low voltage reduces power draw
  • 260-pin SODIMM fits QNAP NAS slots
  • CL19 latency supports stable operation

Specifications

BrandNEMIX RAM
SeriesQNAP NAS Compatible Series Memory
ModelQNAP DDR4 2666MHZ Non-ECC Unbuffered SODIMM NAS Memory
Part NumberMS21300-828K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemQnap
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How can I confirm the SODIMM is running at 2666MHz CL19 after installing it in my QNAP NAS?

Check the NAS system information page or BIOS/UEFI memory details; they should show DDR4-2666 speed, 1.20V voltage and CAS latency 19 for the installed module.

What comes in the package and do I need any extra parts for installation?

The box contains one 8GB 260-pin DDR4 SODIMM (2Rx8, non-ECC, unbuffered); no additional components or tools are required for a standard QNAP NAS memory slot.

Should I choose this 8GB 2Rx8 module or look for a different capacity or rank for my QNAP system?

Select this 8GB 2Rx8 stick if your NAS has a free SODIMM slot and the manufacturer lists PC4-21300 CL19 as supported; match the existing rank and voltage if adding to populated slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.