We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, no heat spreader, 288 gold contacts along bottom edge

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 1Rx8 1.2V UDIMM memory upgrade

SKU CH-VPBQ-XXNNM

An 8 GB DDR4 UDIMM running at 3200 MHz with CL22 latency and 1.2 V operation for compatible ASRock A520 motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 3200 speed feeds data to the CPU faster
  • CL22 latency keeps timing tight for everyday workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboard slots

ASRock DDR4 3200 UDIMM

This 8 GB DDR4 module runs at 3200 MT/s with CL22 timing and 1.20 V operation. It is built as a 1Rx8 unbuffered non-ECC UDIMM for desktop systems. The stick targets owners of ASRock A520M-HDV, A520M-HDVP, A520M-HDVP R2.0 and A520M-HDVP/DASH motherboards who want a straightforward capacity increase.

Tool-free DIMM slot installation

Align the notch on the 288-pin edge connector with the motherboard key and press down until the retention clips latch. No heat spreader is fitted, so clearance is minimal. The main risk is mixing this stick with modules of different speed, latency or rank, which can prevent the system from posting or force it to run at the lowest common settings.

Builders adding 8 GB to compatible ASRock boards

The part suits users who need a single 8 GB upgrade for the listed A520M models and do not require ECC or registered memory. It is not for systems that demand ECC error correction, registered buffering, higher frequencies, lower latencies or capacities beyond 8 GB per module.

Highlights

  • 8 GB capacity adds responsive multitasking headroom
  • DDR4 3200 speed feeds data to the CPU faster
  • CL22 latency keeps timing tight for everyday workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboard slots

Specifications

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

How can I verify the memory is running at 3200 MHz with CL22 after installation?

Enter the BIOS and confirm the DRAM frequency reads 3200 MHz and the CAS latency is set to 22; the module will operate at 1.2 V by default.

What is included in the package and do I need any extra parts to install it?

The box contains one 8 GB 288-pin DDR4 UDIMM; no additional components are required for installation in a compatible desktop motherboard.

Which capacity and rank should I choose for a board that supports 1Rx8 modules?

This 8 GB 1Rx8 stick matches the specification; select it if your system calls for a single-rank 8 GB DDR4 3200 module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.