We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM for POSIFLEX XT-3915-G2 JIVA Foldable 15 Terminal memory upgrade

SKU CH-W6Q3-0J25X

8GB DDR4 3200 CL22 SODIMM module built for POSIFLEX XT-3915-G2 JIVA Foldable 15 terminals

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX XT-3915-G2 JIVA Foldable 15 Terminal
  • 8GB DDR4 3200 speed handles demanding point-of-sale workloads
  • CL22 latency at 1.2V keeps power draw low
  • 260-pin SODIMM fits straight into the terminal slot
  • Built with major OEM chips for long-term stability

8GB DDR4 3200 SODIMM for POSIFLEX XT-3915-G2

This 8GB DDR4 3200 SODIMM module is built specifically for the POSIFLEX XT-3915-G2 JIVA Foldable 15 terminal. It delivers 3200 MT/s speed at CL22 latency with a standard 1.20V operating voltage. The non-ECC unbuffered design matches the original system specification for reliable point-of-sale operation.

Simple slot insertion with verified compatibility

Installation follows the standard SODIMM process: power down the terminal, open the memory compartment, align the 260-pin module with the keyed slot, and press firmly until the retention clips engage. The 2Rx8 organisation and major OEM chipset ensure the module passes rigorous stress testing. No heat spreader is fitted, so clearance inside the compact chassis is not a concern.

Confirm DDR4 SODIMM slot and maximum capacity

Before ordering, verify that the terminal uses a DDR4 SODIMM slot and supports 3200 MT/s modules at 1.20V. Check the service manual for the maximum memory capacity per slot and total system limit to ensure this 8GB module is within the supported range. This module is not suitable for systems requiring ECC, registered memory or a different DDR generation.

Highlights

  • Designed for POSIFLEX XT-3915-G2 JIVA Foldable 15 Terminal
  • 8GB DDR4 3200 speed handles demanding point-of-sale workloads
  • CL22 latency at 1.2V keeps power draw low
  • 260-pin SODIMM fits straight into the terminal slot
  • Built with major OEM chips for long-term stability

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

How do I confirm the 3200MHz CL22 SODIMM is running at full speed after installing it in my POSIFLEX XT-3915-G2?

Enter the system BIOS or use a tool like CPU-Z to verify the memory frequency shows 3200MHz and the timings read CL22-22-22.

What comes in the package and do I need any extra parts for the POSIFLEX XT-3915-G2?

The box contains one 8GB 260-pin DDR4 SODIMM module. No additional components or tools are required for installation.

Which NEMIX RAM version should I choose for the JIVA Foldable 15 terminal?

Select the 8GB DDR4 3200 CL22 2Rx8 1.2V SODIMM with part number MS25600-828K1, built specifically for the POSIFLEX XT-3915-G2.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.