We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader, 260-pin SODIMM form factor

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 260-pin SODIMM POSIFLEX ZT-3115E memory upgrade

SKU CH-Q69C-NQK3M

8 GB DDR4 3200 CL22 2Rx8 1.20 V 260-pin SODIMM for Posiflex ZT-3115E POS terminals

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity boosts POS terminal multitasking
  • DDR4 3200 speed matches system memory bus
  • CL22 latency supports stable transaction processing
  • 260-pin SODIMM fits ZT-3115E slot exactly
  • 2V operation keeps power draw low

POSIFLEX ZT-3115E DDR4 SODIMM

This NEMIX RAM module adds 8 GB of DDR4 memory to the POSIFLEX ZT-3115E point-of-sale terminal. It operates at 3200 MT/s with CL22 timing and 1.20 V. The 260-pin SODIMM form factor fits the kiosk's dedicated memory slot.

Suits single-slot POS upgrades.

The 2Rx8 single-stick design works when the terminal has one open SODIMM socket or when replacing an existing module. Systems that require matched pairs for dual-channel operation or that need more than 8 GB total capacity should consider a different configuration.

2Rx8 rank and 260-pin DDR4 interface decide fit

The module uses a 2Rx8 organisation on a 260-pin DDR4 SODIMM PCB. Verify that the POSIFLEX ZT-3115E accepts this rank structure and pin count before purchase, as other ranks or pin layouts will not seat correctly.

Highlights

  • 8GB capacity boosts POS terminal multitasking
  • DDR4 3200 speed matches system memory bus
  • CL22 latency supports stable transaction processing
  • 260-pin SODIMM fits ZT-3115E slot exactly
  • 2V operation keeps power draw low

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Is the 8 GB CL22 module the only capacity and latency offered for the POSIFLEX ZT-3115E?

The listed part MS25600-828K1 is a single 8 GB stick with CL22 timing; no other capacities or latencies appear in the specifications for this model.

Will the DDR4 3200 rating actually run at 3200 MT/s inside the ZT-3115E?

The module is rated PC4-25600 at 3200 MT/s, but the POS terminal's memory controller determines the final speed; it may downclock to the platform's maximum supported frequency.

Does the 260-pin SODIMM use standard DDR4 keying and 1.2 V operation?

Yes, it is a 260-pin DDR4 SODIMM operating at 1.2 V with non-ECC unbuffered signalling, matching the standard DDR4 SO-DIMM electrical and mechanical interface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.