We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 ASUS Pro WS WRX80E-SAGE SE WiFi memory upgrade

SKU CH-5V7T-TP6EV

8GB DDR4 3200 ECC registered DIMM for ASUS Pro WS WRX80E-SAGE SE WiFi motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on multi-module server boards
  • 3200 MHz DDR4 speed matches platform memory controller spec
  • 2 V operation reduces power draw per module
  • Validated for ASUS Pro WS WRX80E-SAGE SE WiFi motherboard

ASUS WRX80E-SAGE SE WiFi compatible DDR4 ECC RDIMM

This 8 GB registered DIMM is built for the ASUS Pro WS WRX80E-SAGE SE WiFi motherboard. It targets system integrators and IT professionals who need validated ECC memory for stable server or workstation operation. The single-rank module installs in a standard 288-pin DDR4 slot. No heat spreader is fitted, keeping the profile low for dense configurations.

DDR4 3200 registered ECC operates within JEDEC

The module runs at 1.20 V with a CAS latency of CL22. Registered buffering adds one clock cycle of address-command delay, which is required by the platform chipset. Mixing registered and unbuffered DIMMs is not supported by the memory controller. Population rules for the WRX80E-SAGE SE WiFi board dictate which slots must be filled first for correct channel interleaving.

1Rx8 organisation decides upgrade path

Each stick provides a single 8-bit rank, so total capacity scales with the number of populated slots. Builders who need more than 8 GB per channel must add further modules rather than using a dual-rank alternative. Systems requiring higher per-DIMM density or non-ECC memory cannot use this part.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on multi-module server boards
  • 3200 MHz DDR4 speed matches platform memory controller spec
  • 2 V operation reduces power draw per module
  • Validated for ASUS Pro WS WRX80E-SAGE SE WiFi motherboard

Specifications

BrandNEMIX RAM
SeriesASUS Server Motherboard Compatible Series Memory
ModelASUS DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASUS
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Should I choose the 8GB module or add multiple sticks for the ASUS Pro WS WRX80E-SAGE SE WiFi?

The module is an 8GB single rank 1Rx8 DDR4 3200 ECC RDIMM; populate the board's eight DDR4 slots in matched sets to reach the desired total capacity.

What does the DDR4 3200 PC4-25600 rating deliver once installed in the workstation?

It runs at 3200 MT/s with CL22 latency at 1.2V, providing registered ECC bandwidth of PC4-25600 for stable server workloads.

How does the 288-pin RDIMM interface and registered ECC design affect compatibility and speed limits?

The 288-pin DDR4 RDIMM fits only DDR4 RDIMM slots; the registered buffer and ECC require a supporting chipset and cap operation to the module's rated 3200 MT/s.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.