We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR4 RDIMM circuit board with gold contacts and black chips

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 Dell PowerEdge R7515

SKU CH-GBZX-YZS6D

8 GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2 V operation for Dell PowerEdge R7515 servers

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • 3200 MHz DDR4 speed handles demanding server applications
  • Registered design reduces electrical load for system stability
  • 20 V operation lowers power draw in dense configurations
  • Validated for Dell PowerEdge R7515 rack servers

Dell PowerEdge R7515 RDIMM

This 8 GB DDR4 3200 registered ECC module is built for the Dell PowerEdge R7515 rack server. It targets administrators who need validated, single-rank memory to expand or replace system RAM in a production environment. The CL22 timing and 1.2 V operation match the platform's qualified specifications.

288-pin DDR4 slot requirement

The stick fits a standard 288-pin DDR4 RDIMM socket and relies on the server's registered memory controller for signal integrity. No heat spreader is included, so airflow through the chassis must reach the bare PCB. Installation frees no additional resources beyond the occupied DIMM slot itself.

1.2 V registered ECC thermals

At 1.20 V the module runs cool enough for dense server configurations without active cooling on the DIMM. Registered buffering and ECC add negligible latency while protecting data integrity under sustained load. Power draw stays within the DDR4 3200 JEDEC envelope for this capacity and rank.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • 3200 MHz DDR4 speed handles demanding server applications
  • Registered design reduces electrical load for system stability
  • 20 V operation lowers power draw in dense configurations
  • Validated for Dell PowerEdge R7515 rack servers

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the CL22 latency limit throughput once the R7515 memory bus is fully saturated?

CL22 is the rated CAS latency at 3200 MT/s; sustained throughput is governed by the DDR4 3200 bus and the server's memory controller.

How much heat does the 1.2 V registered module add during continuous operation?

The module runs at 1.20 V with no heat spreader; registered ECC RDIMMs at this voltage typically add minimal thermal load inside a Dell PowerEdge R7515 chassis.

Which motherboard slot and chipset combination is required for this 288-pin RDIMM?

It requires a Dell PowerEdge R7515 motherboard with DDR4 RDIMM slots and a compatible server chipset that supports registered ECC memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.