We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 1Rx8 Tyan Transport CX GC68A-B8036

SKU CH-6FFQ-4M9JP

8GB DDR4 3200 ECC RDIMM CL22 1Rx8 1.20V 288-pin registered server memory for Tyan Transport CX GC68A-B8036

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 3200 MT/s throughput matches Tyan Transport CX GC68A-B8036 specifications
  • 2 V operation reduces power draw per 8 GB module
  • 288-pin DDR4 RDIMM form factor ensures direct slot compatibility

System-Specific DDR4 RDIMM for Tyan Transport CX

This 8 GB registered ECC module runs at DDR4 3200 with CL22 latency and 1.20 V operation. It uses a 1Rx8 organisation on a 288-pin RDIMM form factor and is validated for the Tyan Transport CX GC68A-B8036 platform. The part number is MR25600-818K1 and chips are sourced from major OEM suppliers.

Upgrade from non-ECC or lower-capacity DDR4 RDIMMs

Replacing unbuffered or non-ECC memory with this registered ECC module adds error correction and signal integrity for mission-critical workloads. The jump is worthwhile when your Tyan server requires registered DIMMs and you need to populate empty slots or replace failed sticks with a compatible 8 GB unit.

Verify your motherboard requires DDR4 RDIMM ECC

Confirm the Tyan Transport CX GC68A-B8036 manual lists DDR4 3200 registered ECC RDIMMs with 1Rx8 organisation and 1.20 V support. Ensure the memory controller accepts CL22 timing and that the system BIOS is current enough to recognise the module. Do not install in platforms that require unbuffered or non-ECC DIMMs.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 3200 MT/s throughput matches Tyan Transport CX GC68A-B8036 specifications
  • 2 V operation reduces power draw per 8 GB module
  • 288-pin DDR4 RDIMM form factor ensures direct slot compatibility

Specifications

BrandNEMIX RAM
SeriesTyan Server/Workstation Motherboard Compatible Series Memory
ModelTyan DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTyan
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Will the 288-pin DDR4 RDIMM fit the memory slots on my Tyan Transport CX GC68A-B8036 server?

Yes, this module uses the standard 288-pin DDR4 RDIMM form factor designed for the Tyan Transport CX GC68A-B8036 motherboard slots.

What is the correct orientation for installing this registered ECC module, and which notch alignment do I check?

Align the off-centre notch on the module's gold edge with the key in the DDR4 slot; press down firmly until both side clips click shut to seat the registered DIMM.

Does the lack of a heat spreader mean I need to add active cooling or replace the module sooner?

No, the module runs at standard 1.2 V without a heat spreader; server chassis airflow is sufficient and no scheduled replacement is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.