We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare DDR4 RDIMM circuit board with eight black memory chips on one side and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM Gigabyte MZ01-CE1 EPYC memory upgrade

SKU CH-02CA-157CE

8 GB DDR4 3200 ECC registered DIMM for Gigabyte MZ01-CE1 EPYC motherboards

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable multi-module operation
  • 3200 MT/s speed matches EPYC platform specifications
  • 2 V operation lowers power draw per module
  • Validated for Gigabyte MZ01-CE1 motherboard compatibility

Gigabyte MZ01-CE1 EPYC memory upgrade

This 8 GB DDR4 3200 ECC RDIMM is built for the Gigabyte MZ01-CE1 motherboard running AMD EPYC processors. It targets server and workstation operators who need registered error-correcting memory for stable, continuous operation. The single-rank 1Rx8 module delivers 8 GB of capacity at 1.2 V.

Installing registered DIMM in EPYC server

Installation follows the standard 288-pin DDR4 RDIMM procedure; seat the module firmly until the retention clips engage. Because the motherboard requires registered ECC memory, mixing unbuffered or non-ECC DIMMs will prevent boot. Verify the board’s qualified-vendor list and populate slots per the manual to avoid channel-interleaving errors.

8 GB DDR4 3200 capacity and headroom

At 3200 MT/s with CL22 latency the module handles typical virtualization, database and file-serving workloads within a single-channel budget. The 8 GB limit per DIMM means larger datasets or heavy container densities will exhaust capacity quickly, requiring additional slots or higher-density registered modules to scale further.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable multi-module operation
  • 3200 MT/s speed matches EPYC platform specifications
  • 2 V operation lowers power draw per module
  • Validated for Gigabyte MZ01-CE1 motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesGigabyte Server Motherboard Compatible Series Memory
ModelGigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemGigabyte
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How can I verify the module is running at DDR4 3200 with ECC active after installation?

Check the BIOS memory information or use a tool such as dmidecode to confirm the speed shows 3200 MT/s, the type reads DDR4 ECC Registered and the voltage reads 1.20V.

What exactly ships in the package and is any additional hardware required?

The box contains one 8GB 288-pin DDR4 RDIMM rated at PC4-25600 CL22 1Rx8; no extra brackets, cables or heat spreaders are included or needed.

Which capacity or rank option should I pick for a Gigabyte MZ01-CE1 EPYC board?

This listing is the single 8GB 1Rx8 registered DIMM (part MR25600-818K1); choose it when you need one module to fill a slot or to match existing 1Rx8 sticks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.