NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
8 GB DDR5 4800 CL40 SODIMM for Dell Precision 3571, 1.1 V unbuffered non-ECC with major OEM chips
This 8 GB module is built for the Dell Precision 3571 mobile workstation. It uses a 262-pin DDR5 SODIMM form factor with a single 1Rx8 rank. The non-ECC unbuffered design targets standard laptop and all-in-one memory slots.
Operating at 1.10 V, the module runs at the standard DDR5 4800 voltage without a heat spreader. Power consumption stays low during typical workloads and idle periods. No active cooling is required for normal operation.
The stick uses major OEM chips from Samsung, Micron or Hynix and is validated for the Precision 3571 platform. A single 8 GB unit leaves other slots free for future expansion. Buyers needing more than 8 GB total capacity or ECC support should look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Laptop, AIO All-in-One, Mobile Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-818K1 |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM |
Power off the laptop, disconnect the battery, open the memory compartment, align the notch on the module with the slot key, press firmly until the clips click, then reconnect the battery before booting.
No periodic maintenance is required; the module is validated for lifetime operation and would only need replacement if a memory error appears or capacity must be increased.
The CAS latency of 40 cycles at 4800 MT/s sets the primary latency bound before thermal throttling becomes a factor.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?