We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two bare green circuit boards with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 ECC UDIMM for SuperMicro BH4SR2-25G BH4SRG memory upgrade

SKU CH-FKN8-9436Y

96GB DDR5 ECC UDIMM kit with two 48GB modules running at 5600 CL46 for SuperMicro BH4SR2-25G and BH4SRG motherboards

  • Capacity96GB (2 x 48GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB total capacity with two 48 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC protection detects and corrects single-bit errors
  • Low 1.1 V operation reduces power draw
  • Unbuffered 288-pin UDIMM fits SuperMicro BH4SR2-25G and BH4SRG

96 GB DDR5 ECC UDIMM kit

This 96 GB kit contains two 48 GB DDR5 5600 modules rated at CL46 and 1.1 V. It is built for SuperMicro BH4SR2-25G and BH4SRG motherboards that accept unbuffered ECC UDIMMs. Buyers needing registered DIMMs or non-ECC memory cannot use this kit.

Two-module 2Rx8 configuration

The kit delivers 96 GB in a dual-channel pair of 2Rx8 modules without a heat spreader. This layout lets the board populate two slots at the rated PC5-44800 speed while keeping the standard 1.1 V operating voltage. Systems requiring a different rank structure or higher density per slot will not match this configuration.

Bare 288-pin UDIMM form factor

Each module uses a plain 288-pin DDR5 UDIMM PCB with no spreader, so clearance depends entirely on the motherboard slot spacing and CPU cooler overhang. The unbuffered ECC design plugs directly into the SuperMicro boards listed, but platforms that demand registered or load-reduced DIMMs will not accept these modules.

Highlights

  • 96 GB total capacity with two 48 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC protection detects and corrects single-bit errors
  • Low 1.1 V operation reduces power draw
  • Unbuffered 288-pin UDIMM fits SuperMicro BH4SR2-25G and BH4SRG

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K2
Capacity96GB (2 x 48GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank2Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Questions about this item

Will the 48 GB modules need any firmware updates or maintenance after install?

No firmware updates are required; the DDR5 modules run at 1.1 V with CL46 timings and have no heat spreader, so they operate maintenance-free once seated.

What limit appears first when the kit runs at 5600 MT/s continuously?

The CL46 CAS latency and 1.1 V operating voltage define the timing and power envelope that the memory controller reaches before any thermal throttle on these unbuffered UDIMMs.

How much heat and noise do the two 48 GB sticks produce under all-day load?

Without a heat spreader the modules rely on case airflow; at 1.1 V they generate modest heat and add no audible noise, so standard server cooling is sufficient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.