We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600MHz CL46 2Rx8 1.1V 262-Pin SODIMM memory upgrade

SKU CH-R5HG-862K1

A 96GB kit of two 48GB DDR5 SODIMMs running at 5600MHz CL46 and 1.1V, validated for the Supermicro X14SPN-H motherboard

  • Capacity96GB (2 x 48GB)
  • Type262-Pin DDR5 SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 96GB 2X48GB

  • 96 GB total capacity from a matched 2 × 48 GB kit
  • DDR5 5600 MHz speed rated at PC5-44800 for full system throughput
  • CL46 CAS latency at 1.10 V keeps timing tight and power low
  • 2Rx8 dual-rank unbuffered SODIMM with 262 pins fits the motherboard slot exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

Exact-fit upgrade

This 96GB kit delivers two 48GB DDR5 SODIMM modules rated at 5600MHz with CL46 timing and 1.1V operation. It is built for the Supermicro X14SPN-H motherboard and uses the 262-pin unbuffered form factor that the platform requires. The 2Rx8 rank configuration matches the memory controller expectations so the full capacity is recognised at rated speed. Major OEM chips from Samsung, Micron or Hynix provide tested stability.

2Rx8 rank and 1.1V voltage

The single specification that decides fitment is the 2Rx8 dual-rank organisation combined with the 1.1V JEDEC voltage. If your system expects a different rank structure or voltage the modules will not initialise at the rated 5600MHz PC5-44800 data rate. Verify that your board documentation lists support for 2Rx8 DDR5 SODIMMs at this voltage before ordering.

Simple SODIMM installation

Installation follows the standard SODIMM procedure: power down, open the memory access panel, align the 262-pin notch, insert at an angle and press until the retention clips latch. Common issues arise when the board firmware does not yet support 48GB density modules or when population order rules are ignored. Consult the system manual for approved slot order and update the BIOS if the kit is not detected at full capacity.

Highlights

  • 96 GB total capacity from a matched 2 × 48 GB kit
  • DDR5 5600 MHz speed rated at PC5-44800 for full system throughput
  • CL46 CAS latency at 1.10 V keeps timing tight and power low
  • 2Rx8 dual-rank unbuffered SODIMM with 262 pins fits the motherboard slot exactly
  • Built with major OEM Samsung, Micron or Hynix chips and tested for stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS44800-4828K2
Capacity96GB (2 x 48GB)
Type262-Pin DDR5 SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 5600MHz speed run at full rate in a Supermicro X14SPN-H motherboard?

Yes, the kit is spec-matched to the X14SPN-H memory controller so it is recognised at the rated DDR5 5600 (PC5-44800) speed without manual tuning.

Does the PC5-44800 rating impose any bandwidth ceiling on this board?

PC5-44800 is the JEDEC standard name for DDR5 5600; the motherboard's memory controller determines the actual throughput, and this kit meets that standard exactly.

Will the 262-pin SODIMM modules fit the Supermicro X14SPN-H motherboard slots?

Yes, the board requires 262-pin DDR5 SODIMM modules and this kit uses that exact form factor, not a desktop UDIMM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.