We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB 6x16GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H13SVW-NT-OS2 memory upgrade

SKU CH-JVR4-851QY

Six 16 GB DDR5 ECC RDIMM modules totalling 96 GB at 4800 MHz CL40 1.1 V for Supermicro H13SVW-NT-OS2

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity across six 16 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency and 1.1 V operation for efficient throughput
  • ECC and registered design corrects single-bit errors and stabilises fully populated channels
  • 288-pin RDIMM form factor matches Supermicro H13SVW-NT-OS2 memory slots exactly
  • Built with Samsung, Micron or Hynix DRAM for enterprise-grade reliability

Server-ready DDR5 ECC RDIMM kit

This 96GB kit contains six 16GB DDR5 4800 RDIMMs built to the exact rank, voltage and timing the Supermicro H13SVW-NT-OS2 motherboard expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors before they reach production workloads.

96GB capacity with registered headroom

Six 1Rx8 modules deliver 96GB total at 1.10V and CL40, giving multi-socket servers the registered buffering needed for full-slot population. The kit stops at DDR5 4800; workloads that demand higher transfer rates or lower latency will need a platform that supports faster memory.

Direct replacement for partial or slower DDR5 sets

Swapping a smaller or mixed-speed population for this matched 6-module kit removes rank mismatches and lets the memory controller run every channel at 4800 MT/s. The jump is worthwhile when the board's population rules call for six identical RDIMMs and the current configuration leaves slots empty or runs at reduced frequency.

Highlights

  • 96 GB capacity across six 16 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency and 1.1 V operation for efficient throughput
  • ECC and registered design corrects single-bit errors and stabilises fully populated channels
  • 288-pin RDIMM form factor matches Supermicro H13SVW-NT-OS2 memory slots exactly
  • Built with Samsung, Micron or Hynix DRAM for enterprise-grade reliability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 96GB kit of six 16GB DDR5 4800 RDIMMs work alongside any existing DDR5 modules I keep in the Supermicro H13SVW-NT-OS2?

The kit uses 1Rx8 registered ECC modules at 1.1V CL40. For reliable operation, all installed DIMMs must match rank, voltage, timing and registered type; mixing different specifications can prevent the server from booting or running at rated speed.

How can I verify the kit is running at DDR5 4800 with CL40 and ECC active after installation?

Enter the system BIOS or UEFI and confirm the memory speed shows 4800 MT/s, CAS latency 40, voltage 1.1V and ECC enabled; the OS memory report should also list 96GB total with ECC functional.

What exactly ships in the box and is anything else required to install it?

The box contains the 96GB kit as six 16GB 288-pin DDR5 RDIMMs; no additional parts are included, and no separate components are needed beyond a compatible Supermicro H13SVW-NT-OS2 motherboard with available DIMM slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.