We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM sticks, bare chips, 288-pin, 96GB kit

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM Cisco UCS C220 M7 memory upgrade

SKU CH-AS25-QD3BJ

A 96 GB DDR5 ECC registered kit of six 16 GB modules at 4800 MHz CL40 for Cisco UCS C220 M7 servers

  • Capacity96GB (6 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB total capacity for demanding server workloads
  • Six 16 GB modules fill all memory channels
  • DDR5 4800 speed with CL40 latency
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw

Cisco UCS C220 M7 memory kit

This 96GB kit contains six 16GB DDR5 RDIMM modules built for the Cisco UCS C220 M7 rack server. Each module is registered and carries ECC for data-integrity protection in mission-critical workloads. The kit arrives new and ready for installation in the server's 288-pin DDR5 slots.

DDR5 4800 CL40 1Rx8 registered ECC

The decisive specification is the DDR5 4800 speed grade with CL40 latency in a 1Rx8 registered ECC configuration. This combination matches the memory controller requirements of the Cisco UCS C220 M7 and cannot be substituted with unbuffered or non-ECC modules. Buyers who need a different rank structure or voltage must select another part.

Sustained-load behaviour at 1.10V

Modules operate at 1.10V and are stress-tested under load to maintain stability during extended server duties. The registered buffer reduces electrical loading on the memory bus, helping consistent throughput when all six slots are populated. Systems that require passive cooling or lower-density DIMMs should verify thermal headroom before deployment.

Highlights

  • 96 GB total capacity for demanding server workloads
  • Six 16 GB modules fill all memory channels
  • DDR5 4800 speed with CL40 latency
  • ECC registered design protects data integrity
  • 1 V operation reduces power draw

Specifications

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (6X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

What does the 4800 MT/s rating mean once the modules are installed in a Cisco UCS C220 M7?

The kit will run at DDR5-4800 speed with CL40 latency at 1.10 V, delivering the rated PC5-38400 bandwidth inside the qualified server platform.

How does the DDR5 RDIMM interface limit performance in this server?

The registered DDR5 RDIMM interface operates at 4800 MT/s and is capped by the CPU memory controller and platform firmware in the Cisco UCS C220 M7.

Will the 288-pin DDR5 RDIMM modules fit the Cisco UCS C220 M7 memory slots?

Yes, the 288-pin DDR5 RDIMM form factor matches the DIMM slots on the Cisco UCS C220 M7 rack server.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.