We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 ECC RDIMM 2Rx4 memory upgrade

SKU CH-K4YX-C0WFW

96GB DDR5 4800 ECC RDIMM with CL40 latency and 1.1V operation for server workloads

  • Capacity96GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB capacity supports heavy server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx4 dual-rank layout maximises memory density

96GB DDR5 4800 ECC RDIMM for servers

This 96GB DDR5 4800 CL40 module is a registered ECC RDIMM built for server and workstation platforms that require error-correcting memory. It operates at 1.1V with a 2Rx4 organisation and fits 288-pin DDR5 slots. The part is validated for Hynix-compatible systems and carries the MR38400-9624K1 designation.

Replaces lower-capacity or non-ECC DDR5 RDIMMs

The jump is worth it when your workload needs 96GB in a single slot and mandatory error correction for data integrity. Registered buffering reduces electrical load on the memory controller, allowing higher total system capacity than unbuffered alternatives. CL40 latency at 4800MT/s matches the standard JEDEC timing for this speed grade.

Verify DDR5 RDIMM support and voltage compatibility

Confirm the motherboard accepts 288-pin DDR5 registered DIMMs and can supply 1.1V operation. Check the qualified vendor list for 96GB 2Rx4 modules and ensure the BIOS revision supports this density. Systems limited to UDIMM or lower maximum capacity per slot cannot use this module.

Highlights

  • 96 GB capacity supports heavy server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx4 dual-rank layout maximises memory density

Specifications

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHynix
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (1X96GB) DDR5 4800MHZ PC5-38400 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the 288-pin DDR5 RDIMM fit my Hynix-compatible server motherboard?

Yes, the module is a 288-pin DDR5 RDIMM designed for Hynix-compatible server and workstation boards.

What is the correct way to seat this 2Rx4 registered module so the ECC function initialises?

Power off the system, align the notch with the slot key, press firmly until both retention clips click, then enable ECC in the BIOS.

When should I plan to swap out this 96GB 1.1 V module?

Replace it if the server logs uncorrectable ECC errors or if a memory diagnostic reports persistent faults.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.