We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-ZHSF-3F658

96GB DDR5 5600 ECC registered RDIMM with CL46 timing and 1.1V operation, validated for Supermicro X14SRA-T servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Show 4 more configurations
  • 96 GB capacity fits large server workloads
  • DDR5 5600 speed matches Supermicro X14SRA-T specs
  • CL46 latency with 1.10 V voltage meets controller expectations
  • 2Rx4 registered ECC design prevents silent data errors
  • 288-pin RDIMM form factor installs in approved slots

Exact-match DDR5 RDIMM upgrade

This 96GB DDR5 5600 module is built for servers that require registered ECC memory with a 2Rx4 rank structure. It fits the 288-pin RDIMM slots on the Supermicro X14SRA-T motherboard and operates at the standard 1.1V DDR5 voltage.

Sustained-load stability

Registered buffering reduces the electrical load on the memory controller so every slot can run fully populated at the rated 5600 MT/s without down-clocking. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during continuous workloads.

Rank and voltage gate

The 2Rx4 organization and 1.1V operating point are the decisive specifications; boards that expect a different rank count or voltage will not recognise the module at full capacity. Verify your platform's qualified-vendor list before ordering.

Highlights

  • 96 GB capacity fits large server workloads
  • DDR5 5600 speed matches Supermicro X14SRA-T specs
  • CL46 latency with 1.10 V voltage meets controller expectations
  • 2Rx4 registered ECC design prevents silent data errors
  • 288-pin RDIMM form factor installs in approved slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 1.1V DDR5 5600 RDIMM generate noticeable heat or fan noise when all slots are populated on a Supermicro X14SRA-T?

The module runs at the standard 1.1V DDR5 voltage with no heat spreader, so thermal output depends on chassis airflow and the motherboard's fan curves rather than the DIMM itself. Registered buffering keeps electrical load low even with every slot filled.

What must the motherboard provide for this 288-pin 2Rx4 ECC RDIMM to operate?

The board needs DDR5 RDIMM slots, a memory controller that accepts registered ECC modules, and BIOS support for 96GB 2Rx4 DIMMs at 5600 MT/s with CL46 timings. The Supermicro X14SRA-T meets those requirements.

Can this 5600 MT/s CL46 kit run alongside older DDR5 modules at a lower common speed in the same server?

Yes, the memory controller will negotiate the highest speed all installed DIMMs share. Mixing ranks or timings is supported but the system will run at the slowest module's rated frequency and loosest latency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.