We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board DDR5 RDIMM module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Cisco memory upgrade

SKU CH-FG29-A76XR

A 96 GB DDR5 registered ECC module running at 5600 MT/s with CL46 latency, 2Rx4 organisation and 1.1 V operation for Cisco servers

  • Capacity96GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB capacity for large server workloads
  • DDR5 5600 speed for high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx4 288-pin RDIMM fits Cisco UCS servers

Cisco DDR5 RDIMM Upgrade

This 96GB registered DIMM runs at DDR5 5600 with CL46 latency and 1.1V operation. It uses a 2Rx4 organisation on a 288-pin form factor with ECC and parity checking for data integrity. The module is built with major OEM DRAM from Samsung, Micron or Hynix and carries no heat spreader.

Suits Cisco UCS servers needing maximum density

Administrators expanding memory in compatible Cisco UCS platforms will gain 96GB in a single registered DIMM without exceeding the platform's voltage or timing envelope. Environments that require unbuffered UDIMMs, non-ECC memory, lower densities per module, or a different pin count must select a different part.

Registered ECC with 2Rx4 organisation

The registered buffer and on-die ECC correct single-bit errors and reduce electrical load on the memory controller, which is mandatory for the target Cisco UCS platforms. Systems that accept only unbuffered non-ECC DIMMs or that require a different rank configuration will not POST with this module installed.

Highlights

  • 96 GB capacity for large server workloads
  • DDR5 5600 speed for high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • 2Rx4 288-pin RDIMM fits Cisco UCS servers

Specifications

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 5600MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (1X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What does the 96 GB capacity mean when the module is installed in a Cisco server?

The single 96 GB DDR5 5600 RDIMM delivers that full capacity in one slot, using 2Rx4 organisation and ECC for error correction in registered server workloads.

How does the DDR5 5600 PC5-44800 interface limit performance in practice?

The DDR5 5600 PC5-44800 interface runs at 5600 MT/s with CL46 latency and 1.10 V, capping bandwidth and timing to the JEDEC standard for registered DDR5 modules.

What physical slot and mounting does the 288-pin RDIMM need?

The 288-pin DDR5 RDIMM requires a DDR5 RDIMM slot with registered signalling; the module has no heat spreader and fits standard server DIMM sockets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.