We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM GIGABYTE MZ23-SU0 memory upgrade

SKU CH-CA99-0CZGQ

96 GB DDR5 5600 ECC RDIMM with 2Rx4 registered architecture and CL46 latency, validated for the GIGABYTE MZ23-SU0 motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity lets you run larger workloads in a single server
  • DDR5 5600 speed transfers data at PC5-44800 rates for high-throughput applications
  • CL46 latency and 1.1 V operation deliver the exact timing and voltage the memory controller expects
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor matches the GIGABYTE MZ23-SU0 slot and population rules

Capacity and form factor

This 96GB DDR5 RDIMM delivers registered ECC memory in a single 288-pin module rated at 5600 MT/s with CL46 latency. It operates at 1.1V using a 2Rx4 organisation built from major OEM DRAM.

Registered ECC headroom

The registered architecture buffers address and command signals so the memory controller can drive a fully populated server board without signal degradation. ECC corrects single-bit errors on the fly, protecting workloads that cannot tolerate silent data corruption.

GIGABYTE MZ23-SU0 fitment

Designed as an exact-match upgrade for the GIGABYTE MZ23-SU0 motherboard, the module matches the board's required RDIMM form factor, voltage and population rules. Builders needing UDIMM, SODIMM or non-ECC memory should select a different product.

Highlights

  • 96 GB capacity lets you run larger workloads in a single server
  • DDR5 5600 speed transfers data at PC5-44800 rates for high-throughput applications
  • CL46 latency and 1.1 V operation deliver the exact timing and voltage the memory controller expects
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor matches the GIGABYTE MZ23-SU0 slot and population rules

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 96GB DDR5 5600 CL46 RDIMM run at full speed alongside older DDR5 modules I keep in other slots on my GIGABYTE MZ23-SU0?

Mixing ranks, speeds, or timings can force the memory controller to downclock all slots to the slowest common settings; for stable 5600 operation populate every channel with identical 2Rx4 CL46 modules.

How can I confirm the 2Rx4 ECC RDIMM is detected at 96GB and 5600 MT/s after installation?

Enter the system BIOS or UEFI and verify the memory information screen shows 96GB total capacity, DDR5-5600 frequency, CL46 latency, and ECC enabled status.

Does the MR44800-9624K1 kit include only the 288-pin RDIMM or are cables, brackets, or a heatsink also supplied?

The package contains the single 96GB 288-pin DDR5 RDIMM; no heatsink, cables, or mounting hardware are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.